GB/T 5080.2-2012
Reliability testing.Part 2:Design of test cycles (English Version)

Standard No.

GB/T 5080.2-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 5080.2-2012

Replace

GB/T 5080.2-1986

Scope

This part applies to the design of the reliability test work and environmental condition test cycle of non-repaired products or repaired products described in 8.1 and 8.2 of GB/T 5080.1-2012. For recommended test conditions, see GB/T 7288-1987 "Recommended Test Conditions for Equipment Reliability Tests". When the "recommended test conditions" are not applicable, this section gives the general procedure of test cycle design, which specifies detailed steps and methods for the test cycle design of specific product reliability tests that need to accurately simulate the actual use conditions. The tests designed in accordance with this section generally cannot replace the usual functional characteristic tests, environmental tests and qualification tests. In some cases, it is necessary to conduct a pre-exposure test before applying the test cycle designed by the method described in this section, and the basis for determining whether to conduct a pre-exposure test is not described in this section.

GB/T 5080.2-2012 Referenced Document

• GB/T 2421 Environmental testing—General and guidance*， 2020-06-02 Update
• GB/T 2422 Environmental testing.Guide to drafting of test methods.Terms and definitions
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
• GB/T 2423.102 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
• GB/T 2423.11 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
• GB/T 2423.12 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
• GB/T 2423.13 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
• GB/T 2423.14 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
• GB/T 2423.15 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
• GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
• GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.18 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）*， 2021-05-21 Update
• GB/T 2423.19 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections*， 2013-11-12 Update
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.20 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections*， 2014-09-30 Update
• GB/T 2423.21 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
• GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*， 2012-12-31 Update
• GB/T 2423.23 Environmental testing.Part 2:Test methods.Test Q:Sealing*， 2013-11-12 Update
• GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*， 2022-07-11 Update
• GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
• GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
• GB/T 2423.27 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests*， 2020-06-02 Update
• GB/T 2423.28 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
• GB/T 2423.29 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2423.30 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents*， 2013-12-17 Update
• GB/T 2423.31 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
• GB/T 2423.32 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
• GB/T 2423.33 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid*， 2021-05-21 Update
• GB/T 2423.34 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test*， 2012-12-31 Update
• GB/T 2423.35 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests*， 2019-06-04 Update
• GB/T 2423.36 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
• GB/T 2423.37 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
• GB/T 2423.38 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance*， 2021-05-21 Update
• GB/T 2423.39 Environmental testing—Part 2：Test methods—Test Ee and guidance：Loose cargo testing including bounce*， 2018-12-28 Update
• GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 2423.40 Environmental testing.Part 2:Test methods.Test Cx:Damp heat, steady state(unsaturated pressurized vapour)*， 2013-12-31 Update
• GB/T 2423.41 Environmental testing.Part 2:Test methods.Wind pressure*， 2013-11-12 Update
• GB/T 2423.42 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
• GB/T 2423.43 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
• GB/T 2423.44 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
• GB/T 2423.45 Environmental testing.Part 2:Test methods.Test Z/ABDM:Climatic sequence*， 2012-12-31 Update
• GB/T 2423.46 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
• GB/T 2423.47 Environmental testing—Part 2: Test methods—Test Fg: Acoustic vibration*， 2018-12-28 Update
• GB/T 2423.48 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method*， 2018-12-28 Update
• GB/T 2423.49 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
• GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*， 2019-05-10 Update
• GB/T 2423.50 Environmental testing part 2: test method test Cy: constant damp heat is mainly used for accelerated testing of components
• GB/T 2423.51 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test*， 2020-06-02 Update
• GB/T 2423.52 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
• GB/T 2423.53 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
• GB/T 2423.54 Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination*， 2022-07-11 Update
• GB/T 2423.55 Environmental testing Part 2: Test methods Test Eh: Hammer test*， 2023-09-07 Update
• GB/T 2423.56 Environmental Testing Part 2: Test Method Test Fh: Broadband Random Vibration and Guidelines*， 2023-09-07 Update
• GB/T 2423.57 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
• GB/T 2423.58 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode
• GB/T 2423.59 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
• GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 2423.60 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices
• GB/T 2423.61 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen*， 2018-12-28 Update
• GB/T 2423.62 Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test*， 2018-12-28 Update
• GB/T 2423.63 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）*， 2019-05-10 Update
• GB/T 2423.7 Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens*， 2018-12-28 Update
• GB/T 2423.8 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
• GB/T 2423.9 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
• GB/T 2424.1 Environmental testing.Part 3:Supporting documentation and guidance.Cold and dry heat tests*， 2015-10-09 Update
• GB/T 2424.10 Environmental testing.General guidance of accelerated testing for atmospheric corrosion*， 2012-12-31 Update
• GB/T 2424.11 Environmental testing.Part 2:Test methods.Guidance to test Kc:Sulphur dioxide test for contacts and connections*， 2013-11-12 Update
• GB/T 2424.12 Environmental testing.Part 2:Test methods.Guidance to test Kd:Hydrogen sulphide test for contacts and connections*， 2014-09-30 Update
• GB/T 2424.13 Environmental testing for electric and electronic products--Part 2: Test methods Guidance on change of temperature tests
• GB/T 2424.14 Environmental testing for electric and electronic products. Part 2: Test methods. Guidance for solar radiation testing
• GB/T 2424.15 Enviromental testing for electric and electronic products.Guide for combined temperature/low air pressure tests
• GB/T 2424.17 Environmental testing for electric and electronic products.Part 2:Test methods Guidance on test T:Soldering test
• GB/T 2424.18 Basic environmental testing procedures for electric and electronic products--Guidance to test of immersion in cleaning solvents
• GB/T 2424.19 Environment tests for electric and electronic products-Guidance on the application of the environmental test to simulate the effects of storage
• GB/T 2424.2 Environment tests for electric and electronic products.Guidance for damp heat tests
• GB/T 2424.20 Basic environmental testing procedures for electric and electronic products--Guidance for test simulating inclinations and motions
• GB/T 2424.21 Basic environmental testing procedures for electric and electronic products--Guidance on solderability testing by the wetting balance method
• GB/T 2424.22 Basic environmental testing procedures for electric and electronic products--Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
• GB/T 2424.23 Basic environmental test procedures for electric and electronic products--Guidance for water test
• GB/T 2424.24 Basic environmental testing procedures for electric and electronic products. Guidance for combined temperature (cold and heat)/low air pressure/vibration(sinusoidal)test
• GB/T 2424.25 Environmental testing for electric and electronic products-Part 3:Test guidance Seismic test methods
• GB/T 2424.26 Environmental testing for electric and electronic products.Part 3:Supporting documentation and guidance.Selecting amongst vibration tests
• GB/T 2424.27 Environmental testing.Supporting, documentation and guidance.Calculation of uncertainty of conditions in climatic test chambers*， 2013-11-12 Update
• GB/T 2424.5 Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature chambers*， 2021-05-21 Update
• GB/T 2424.6 Environmental testing—Part 3:Supporting documentation and guidance—Confirmation of the performance of temperature/humidity chambers*， 2021-05-21 Update
• GB/T 2424.7 Environmental tests for electric and electronic products. Measurements in temperature chambers for tests A and tests B (with load)
• GB/T 2900.13-2008 Electrotechnical terminology.Dependability and quality of service
• GB/T 4796-2008 Classification of Environmental Conditions for Electrical and Electronic Products Part 1: Environmental Parameters and Their Severity
• GB/T 4797.1 Classification of environmental conditions.Environmental conditions appearing in nature.Temperature and humidity*， 2018-05-14 Update
• GB/T 4797.2 Classification of environmental conditions.Environmental conditions appearing in nature.Air pressure*， 2017-12-29 Update
• GB/T 4797.3 Environmental conditions appearing in nature for electric and electronic products.Living organisms*， 2014-06-24 Update
• GB/T 4797.4 Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and temperature*， 2019-12-10 Update
• GB/T 4797.5 Classification of environmental conditions.Environmental conditions appearing in nature.Precipitation and wind*， 2017-12-29 Update
• GB/T 4797.6 Classification of environmental conditions.Environmental conditions appearing in nature.Dust, sand, salt mist*， 2013-11-12 Update
• GB/T 4797.7 Classification of environmental conditions of electric and electronic products.Environmental conditions appearing in nature.Earthquake vibration and shock
• GB/T 4797.8 Classification of environmental conditions for electric and electronic products.Environmental conditions appearing in nature.Fire exposure
• GB/T 4797.9 Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use*， 2021-03-09 Update
• GB/T 4798.1 Classification of environmental conditions—Classification of groups of environmental parameters and their severities Part1:—Storage*， 2019-08-30 Update
• GB/T 4798.10 Environmental conditions existing in the application of electric and electronic products Guidance
• GB/T 4798.2 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 2:Transportation and handling*， 2021-05-21 Update
• GB/T 4798.3 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 3: Stationary use at weatherprotected locations*， 2023-05-23 Update
• GB/T 4798.4 Classification of environmental conditions—Classification of groups of environmental parameters and their severities—Part 4: Stationary use at non-weatherprotected locations*， 2023-05-23 Update
• GB/T 4798.5 Environmental conditions existing in the application of electric and electronic products.Section 5: Ground vehicle installations
• GB/T 4798.6 Classification of environmental conditions.Classification of groups of environmental parameters and their severities.Ship environment
• GB/T 4798.7 Environmental conditions existing in the application of electric and electronic products.Part 7: Portable and non-stationary use
• GB/T 4798.9 Classification of environmental conditions.Classification of groups of environmental parameters and their severities.Microclimates inside products
• GB/T 5080.1-1986 Equipment reliability testing--General requirements

GB/T 5080.2-2012 history

• 2012 GB/T 5080.2-2012 Reliability testing.Part 2:Design of test cycles
• 1986 GB/T 5080.2-1986 Equipment reliability testing--Guidance for the design of test cycles

GB/T 5080.2-2012 -All Parts