GB/T 2423.10-2019
Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) (English Version)

Standard No.
GB/T 2423.10-2019
Language
Chinese, Available in English version
Release Date
2019
Published By
国家市场监督管理总局、中国国家标准化管理委员会
Latest
GB/T 2423.10-2019
Replace
GB/T 2423.10-2008
Scope
This part of GB/TI 2423 gives a standard test method process to determine the ability of components, equipment and other products (hereinafter referred to as samples) to withstand sinusoidal vibration of specified severity. If the test requires an unpackaged form, it indicates that the test sample is unpackaged. However, if the test requires samples to be packaged, use the packaged product and consider the product and its packaging as one sample under test. The purpose of this test is to identify mechanical weaknesses and/or degradation of properties of the sample. Use these data, combined with the relevant specifications to determine whether the sample is acceptable. In some cases, this test method can be used to demonstrate the mechanical structural integrity of samples and/or to study their dynamic characteristics. Components can also be classified according to their ability to withstand different severity levels of this test.

GB/T 2423.10-2019 Referenced Document

  • GB/T 27025 General requirements for the competence of testing and calibration laboratories*， 2019-12-10 Update
  • IEC 60068-1 Environmental testing - Part 1: General and guidance

GB/T 2423.10-2019 history

  • 2019 GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)
  • 2008 GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
  • 1995 GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)

GB/T 2423.10-2019 -All Parts

GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution） GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure GB/T 2423.22-2012 Environmental testing.Part 2:Test methods.Test N:Change of temperature GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state GB/T 2423.30-2013 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents


Copyright ©2024 All Rights Reserved