This document specifies the general conditions and methods for testing samples in condensed water with high concentrations of sulfur dioxide in alternating climates, especially for sulfur dioxide concentrations not included in GB/T9789-2008, so that when testing in different laboratories, Comparable test results can be obtained. This document is intended for use in determining the suitability of products and the materials used in them for use in chemically aggressive environmental conditions. The content of this document does not include the analysis and evaluation of sample shape, sample preparation and test results. Regarding the regulations in these aspects, you can refer to relevant standards or negotiate according to specific circumstances. This test cannot be used directly for comparison of corrosion resistance, unless the application environment of the corrosion protection system is similar. Because the corrosion test conditions are very different from the actual application conditions, the corrosion process and corrosion mechanism are different.
GB/T 2423.33-2021 Referenced Document
GB/T 16545-2015 Corrosion of metals and alloys.Removal of corrosion products from corrosion test specimens
GB/T 2421-2020 Environmental testing—General and guidance
GB/T 5213-2019 Cold rolled low carbon steel sheet and strip
GB/T 9789-2008 Metallic and other non-organic coatings.Sulfur dioxide test with general condensation of moisture
GB/T 2423.33-2021 history
2021GB/T 2423.33-2021 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid
2005GB/T 2423.33-2005 Environmental testing for electric and electronic products Part 2:Test Method Test Kca:High concentration sulfur dioxide
1989GB/T 2423.33-1989 Basic environmental testing procedures for electric and electronic products--Test Kca: High consistence sulphur dioxide test