GB/T 2423.38-2021
Environmental testing—Part 2:Test methods—Test R:Water test method and guidance (English Version)

Standard No.
GB/T 2423.38-2021
Language
Chinese, Available in English version
Release Date
2021
Published By
国家市场监督管理总局、中国国家标准化管理委员会
Latest
GB/T 2423.38-2021
Replace
GB/T 2423.38-2008
Scope
This document specifies the test methods applicable to products that may be affected by dripping, flushing, immersion or high-pressure water during transportation, storage or use. Can guarantee the good working performance of equipment and components. The test methods specified in this document cannot be regarded as general corrosion tests. The water tests identified in other documents are generally not used to simulate natural rainfall because the severity level is too high. Therefore, in addition to general water tests, this document also includes artificial rain tests based on natural conditions, but usually does not consider natural rainfall with strong wind speed. The guidelines in this document give the applicability of tests and the selection of test severity levels.

GB/T 2423.38-2021 history

  • 2021 GB/T 2423.38-2021 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance
  • 2008 GB/T 2423.38-2008 Environmental testing for electric and electronic products.Part2:Test methods.Test R:Water test method and guidance
  • 2005 GB/T 2423.38-2005 Environmental test for electric and electronic products.Part 2:Test mechod Test R:Water test mechod and Guidance
  • 1990 GB/T 2423.38-1990 Basic environmental test procedures for electric and electronic products--Test R: Water test method
Environmental testing—Part 2:Test methods—Test R:Water test method and guidance

GB/T 2423.38-2021 -All Parts

GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution） GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure GB/T 2423.22-2012 Environmental testing.Part 2:Test methods.Test N:Change of temperature GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state GB/T 2423.30-2013 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents


Copyright ©2024 All Rights Reserved