GB/T 2423.23-2013
Environmental testing.Part 2:Test methods.Test Q:Sealing (English Version)

Standard No.
GB/T 2423.23-2013
Language
Chinese, Available in English version
Release Date
2013
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 2423.23-2013
Replace
GB/T 2423.23-1995
Scope
This part of GB/T 2423 specifies various sealing performance test methods. Tests Qa and Qc are rough checks to observe the bubbles emerging from the leak; test Qd is to observe the leakage of liquid under heating conditions; test Qy is to make the gas enter the test chamber through the leak under the condition of reduced pressure. Then measure the performance change of the test chamber; test Qk, Qm is to use tracer gas to detect fine leakage; test Qf, Ql is to make liquid enter it through the leak under pressurized conditions, and then measure its performance change. This part is applicable to testing the sealing performance of various electrical and electronic products, and is also applicable to the sealing testing of other sealing parts.

GB/T 2423.23-2013 Referenced Document

  • GB 4208-2008 Degrees of protection provided by enclosure(IP code)
  • GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance

GB/T 2423.23-2013 history

  • 2013 GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing
  • 1995 GB/T 2423.23-1995 Environmental testing for electric and electronic proucts. Test Q: Sealing
Environmental testing.Part 2:Test methods.Test Q:Sealing

GB/T 2423.23-2013 -All Parts

GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution） GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure GB/T 2423.22-2012 Environmental testing.Part 2:Test methods.Test N:Change of temperature GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state GB/T 2423.30-2013 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents


Copyright ©2024 All Rights Reserved