GB/T 2423.5-2019
Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock (English Version)

Standard No.
GB/T 2423.5-2019
Language
Chinese, Available in English version
Release Date
2019
Published By
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 2423.5-2019
Replace
GB/T 2423.5-1995 GB/T 2423.6-1995
Scope
This part of GB/T 2423 provides a standard procedure for determining the ability of a sample to withstand non-repetitive or repetitive impacts of specified severity. The purpose of this test is to expose mechanical weaknesses and/or performance degradation and cumulative damage and degradation caused by impact, and to use this information, in conjunction with relevant specifications, to determine whether the sample is acceptable. In some cases, the impact test can also be used to determine the structural integrity of the sample, or as a means of quality control (see A.2).

GB/T 2423.5-2019 Referenced Document

  • GB/T 2423.43-2008 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
  • GB/T 2423.5-2019 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock
  • Guide 104 The preparation of safety publications and the use of basic safety publications and group safety publications (Edition 4.0)
  • IEC 60068-1 Environmental testing - Part 1: General and guidance
  • IEC 60721-3-1 Classification of environmental conditions — Part 3-1: Classification of groups of environmental parameters and their severities — Storage
  • IEC 60721-3-5 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations

GB/T 2423.5-2019 history

  • 2019 GB/T 2423.5-2019 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock
  • 1995 GB/T 2423.5-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock
  • 0000 GB 2423.5-1981

GB/T 2423.5-2019 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock has been changed from GB/T 2423.6-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump.

Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock

GB/T 2423.5-2019 -All Parts

GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold GB/T 2423.10-2019 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) GB/T 2423.101-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings GB/T 2423.102-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal) GB/T 2423.11-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements GB/T 2423.12-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high GB/T 2423.13-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium GB/T 2423.14-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low GB/T 2423.15-2008 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady GB/T 2423.16-2022 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist GB/T 2423.18-2021 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution） GB/T 2423.19-2013 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat GB/T 2423.20-2014 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure GB/T 2423.22-2012 Environmental testing.Part 2:Test methods.Test N:Change of temperature GB/T 2423.23-2013 Environmental testing.Part 2:Test methods.Test Q:Sealing GB/T 2423.24-2022 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering GB/T 2423.25-2008 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests GB/T 2423.26-2008 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests GB/T 2423.27-2020 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices GB/T 2423.3-2016 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state GB/T 2423.30-2013 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents


Copyright ©2024 All Rights Reserved