This specification is applicable to the electrical design of transportation buildings such as newly built, expanded, or renovated passenger-oriented civil airport terminals, transportation hub stations, railway passenger stations, urban rail transit stations, maglev train stations, port passenger stations, and bus passenger stations. , not suitable for electrical design in aircraft hangars, oil depots, airport terminals, industry-specific freight stations, automobile gas stations, etc.
GB 50394 Code of design for intrusion alarm systems engineering
GB 50395 Code of design for video monitoring system
GB 50396 Code of design for access control systems engineering
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.10 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test*, 2017-12-29 Update
GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*, 2023-05-23 Update
GB/T 17626.12 Electromagnetic Compatibility Testing and Measurement Techniques Part 12: Ringing Wave Immunity Test*, 2023-03-17 Update
GB/T 17626.13 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.14 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.15 Electromagnetic compatibility.Testing and measurement techniques .Flickermeter.Functional and design specifications *, 2011-12-30 Update
GB/T 17626.16 Electromagnetic compatibility Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 17626.19 Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.*, 2022-12-30 Update
GB/T 17626.20 Electromagnetic compatibility.Testing and measurement techniques.Emission and immunity testing in transverse electromagnetic (TEM) waveguide*, 2014-12-22 Update
GB/T 17626.21 Electromagnetic compatibility.Testing and measurement techniques.Reverberation chamber test methods*, 2014-12-22 Update
GB/T 17626.22 Electromagnetic compatibility (EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs)*, 2017-12-29 Update
GB/T 17626.24 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance*, 2012-11-05 Update
GB/T 17626.27 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.28 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.30 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods*, 2023-12-28 Update
GB/T 17626.34 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase*, 2012-06-29 Update
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 17626.7 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto*, 2017-07-12 Update
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility. Testing and measurement techniques. Pulse magnetic field immunity test *, 2011-12-30 Update
GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
GB/T 2423.102 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
GB/T 2423.11 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
GB/T 2423.12 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
GB/T 2423.13 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
GB/T 2423.14 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
GB/T 2423.15 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*, 2022-07-11 Update
GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*, 2022-07-11 Update
GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
GB/T 2423.27 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests*, 2020-06-02 Update
GB/T 2423.28 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
GB/T 2423.29 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
GB/T 2423.36 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
GB/T 2423.37 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
GB/T 2423.38 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance*, 2021-05-21 Update
GB/T 2423.39 Environmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce*, 2018-12-28 Update
GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 2423.42 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
GB/T 2423.43 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
GB/T 2423.44 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
GB/T 2423.49 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*, 2019-05-10 Update
GB/T 2423.50 Environmental testing part 2: test method test Cy: constant damp heat is mainly used for accelerated testing of components*, 2012-11-05 Update
GB/T 2423.51 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test*, 2020-06-02 Update
GB/T 2423.52 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
GB/T 2423.53 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
GB/T 2423.55 Environmental testing Part 2: Test methods Test Eh: Hammer test*, 2023-09-07 Update
GB/T 2423.56 Environmental Testing Part 2: Test Method Test Fh: Broadband Random Vibration and Guidelines*, 2023-09-07 Update
GB/T 2423.57 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
GB/T 2423.58 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode
GB/T 2423.59 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
GB/T 2423.60 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices
GB/T 2423.61 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen*, 2018-12-28 Update
GB/T 2423.62 Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test*, 2018-12-28 Update
GB/T 2423.63 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration(mixed mode)*, 2019-05-10 Update