GB/T 11313.1-2013
Radio-frequency connectors.Part 1:Generic specification.General requirements and measuring methods (English Version)

Standard No.

GB/T 11313.1-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 11313.1-2013

Replace

GB/T 11313-1996 GB/T 11313.1-2000

Scope

This part of GB/T 11313 specifies the general requirements and test methods for radio frequency connectors. This standard applies to connectors for radio frequency transmission lines in communications, electronic equipment and similar equipment.

GB/T 11313.1-2013 Referenced Document

• GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance
• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
• GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
• GB/T 2423.102 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
• GB/T 2423.11 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
• GB/T 2423.12 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
• GB/T 2423.13 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
• GB/T 2423.14 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
• GB/T 2423.15 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
• GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
• GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.17-2008 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
• GB/T 2423.18 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）*， 2021-05-21 Update
• GB/T 2423.18-2012 Environmental testing.Part 2:Test methods.Test Kb:Salt mist,cyclic(sodium chloride solution)
• GB/T 2423.19 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
• GB/T 2423.20 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections*， 2014-09-30 Update
• GB/T 2423.21 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
• GB/T 2423.21-2008 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
• GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature
• GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
• GB/T 2423.23 Environmental testing.Part 2:Test methods.Test Q:Sealing
• GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*， 2022-07-11 Update
• GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
• GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
• GB/T 2423.27 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests*， 2020-06-02 Update
• GB/T 2423.28 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
• GB/T 2423.28-2005 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
• GB/T 2423.29 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2423.3-2006 Environmental testing for electric and electronic products-Part 2:Tesing method-Test Cab：Damp heat,steady state
• GB/T 2423.30 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents*， 2013-12-17 Update
• GB/T 2423.31 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
• GB/T 2423.32 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
• GB/T 2423.32-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
• GB/T 2423.33 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid*， 2021-05-21 Update
• GB/T 2423.34 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test
• GB/T 2423.35 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests*， 2019-06-04 Update
• GB/T 2423.36 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
• GB/T 2423.37 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
• GB/T 2423.38 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance*， 2021-05-21 Update
• GB/T 2423.39 Environmental testing—Part 2：Test methods—Test Ee and guidance：Loose cargo testing including bounce*， 2018-12-28 Update
• GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
• GB/T 2423.40 Environmental testing.Part 2:Test methods.Test Cx:Damp heat, steady state(unsaturated pressurized vapour)*， 2013-12-31 Update
• GB/T 2423.41 Environmental testing.Part 2:Test methods.Wind pressure
• GB/T 2423.42 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
• GB/T 2423.43 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
• GB/T 2423.44 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
• GB/T 2423.45 Environmental testing.Part 2:Test methods.Test Z/ABDM:Climatic sequence
• GB/T 2423.46 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
• GB/T 2423.47 Environmental testing—Part 2: Test methods—Test Fg: Acoustic vibration*， 2018-12-28 Update
• GB/T 2423.48 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method*， 2018-12-28 Update
• GB/T 2423.49 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
• GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*， 2019-05-10 Update
• GB/T 2423.5-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ea and guidance: Shock
• GB/T 2423.50 Environmental testing part 2: test method test Cy: constant damp heat is mainly used for accelerated testing of components
• GB/T 2423.51 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test*， 2020-06-02 Update
• GB/T 2423.52 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
• GB/T 2423.53 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
• GB/T 2423.54 Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination*， 2022-07-11 Update
• GB/T 2423.55 Environmental testing Part 2: Test methods Test Eh: Hammer test*， 2023-09-07 Update
• GB/T 2423.56 Environmental Testing Part 2: Test Method Test Fh: Broadband Random Vibration and Guidelines*， 2023-09-07 Update
• GB/T 2423.57 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
• GB/T 2423.58 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode
• GB/T 2423.59 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
• GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 2423.6-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 2423.60 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices
• GB/T 2423.61 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen*， 2018-12-28 Update
• GB/T 2423.62 Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test*， 2018-12-28 Update
• GB/T 2423.63 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）*， 2019-05-10 Update
• GB/T 2423.7 Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens*， 2018-12-28 Update
• GB/T 2423.8 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
• GB/T 2423.9 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment

GB/T 11313.1-2013 history

• 2013 GB/T 11313.1-2013 Radio-frequency connectors.Part 1:Generic specification.General requirements and measuring methods
• 2000 GB/T 11313.1-2000 Radio-frequency connectors Part 1-1: Single,multi-series blank detail specification
• 1996 GB/T 11313-1996 Redio-frequency connectors--Part 1: Generic specification--General requirements and measuring methods

GB/T 11313.1-2013 -All Parts