This standard specifies the product classification, technical requirements, test methods, inspection rules, signs, packaging, transportation, storage and accompanying documents of ionizing radiation thickness gauges. This standard applies to ionizing radiation thickness gauges (hereinafter referred to as thickness gauges) that use ionizing radiation to perform non-destructive static measurement of the thickness or mass per unit area of the measured material.
GB/T 15636-2008 Referenced Document
GB 11806 Regulations for the safe transport of radioactive material*, 2019-04-04 Update
GB 15849-1995 Sealed radioactive sources--Leakage test methods
GB 18871-2002 Basic standards for protection against ionizing radiation and for the safety of radiation sources
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres-Part 2: Flameproof enclosure "d"
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres. Part 4: Intrinsic safety“i”
GB 4075-2003 Sealed radioactive sources--General requirements and classification
GB/T 10257-2001 Quality inspection rule for nuclear instruments and nuclear radiation detectors
GB/T 11684-2003 Electromagnetic environment conditions and testing procedures for nuclear instrumentation
GB/T 17625.15 Electromagnetic Compatibility Test and Measurement Technology Scintillator Function and Design Specifications*, 2012-08-01 Update
GB/T 17625.2 Eiectromagnetic compatibility limits(EMC) - Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems,for equipment with rated current ≤16A per phase and not subject to conditional connection
GB/T 17625.7 Electromagnetic compatibility.Limits.Limitation of voltage changes,voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated current≤75 A and subject to conditional connection*, 2013-07-19 Update
GB/T 17625.8 Electromagnetic compatibility.Limits.Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤75 A per phase*, 2015-09-11 Update
GB/T 17625.9 Electromagnetic compatibility—Limits—Signaling on low-voltage electrical installations—Emission levels, frequency bands and electromagnetic disturbance levels*, 2016-12-13 Update
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.10 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test*, 2017-12-29 Update
GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*, 2023-05-23 Update
GB/T 17626.12 Electromagnetic Compatibility Testing and Measurement Techniques Part 12: Ringing Wave Immunity Test*, 2023-03-17 Update
GB/T 17626.13 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.14 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.15 Electromagnetic compatibility.Testing and measurement techniques .Flickermeter.Functional and design specifications *, 2011-12-30 Update
GB/T 17626.16 Electromagnetic compatibility Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 17626.19 Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.*, 2022-12-30 Update
GB/T 17626.20 Electromagnetic compatibility.Testing and measurement techniques.Emission and immunity testing in transverse electromagnetic (TEM) waveguide*, 2014-12-22 Update
GB/T 17626.21 Electromagnetic compatibility.Testing and measurement techniques.Reverberation chamber test methods*, 2014-12-22 Update
GB/T 17626.22 Electromagnetic compatibility (EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs)*, 2017-12-29 Update
GB/T 17626.24 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance*, 2012-11-05 Update
GB/T 17626.27 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.28 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.30 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods*, 2023-12-28 Update
GB/T 17626.34 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase*, 2012-06-29 Update
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 17626.7 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto*, 2017-07-12 Update
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility. Testing and measurement techniques. Pulse magnetic field immunity test *, 2011-12-30 Update
GB/T 18039.10 Electromagnetic compatibility(EMC).Environment.Description of HEMP environment.Radiated disturbance*, 2018-05-14 Update
GB/T 18039.3 Electromagnetic compatibility—Environment—Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems*, 2017-12-29 Update
GB/T 18039.4 Electromagnetic compatibility—Environment—Compatibility levels in industrial plants for low-frequency conducted disturbances*, 2017-12-29 Update
GB/T 18039.9 Electromagnetic compatibility.Environment.Compatibility levels for low-frequency conducted disturbances and signaling in public medium-voltage power supply systems*, 2013-11-12 Update
GB/T 18271.3-2000 Process measurement and control devices--General methods and procedures for evaluating performance--Part 3: Tests for the effects of influence quantities
GB/T 19661.1-2005 Safety requirements for nuclear instrumentations and systems.Part 1:General requirements
GB/T 19661.2-2005 Safety requirements for nuclear instrumentations and systems-Part 2:Requirements of protection from radioactivity
GB/T 7352 Electrical measuring systems and instruments utilizing sources of ionizing radiation
GB/T 8993-1998 Environmental conditions and testing procedures for nuclear instrumentation