- Standard No.
- GB/T 12859.2-2012
- Language
- Chinese, Available in English version
- Release Date
- 2012
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
-
GB/T 12859.2-2012
- Replace
-
GB/T 12860-1991
GB/T 12862-1991
- Scope
- This part of GB/T 12859 specifies the preferred ratings and characteristics selected from the general specification GB/T 12859.1-2012, as well as the applicable quality assessment procedures, applicable test methods and measurement methods. This part applies to GB/T 12859 Piezoelectric ceramic resonators for electronic equipment, but not for leadless resonators and multi-vibrator resonators or resonators with other electronic components,
GB/T 12859.2-2012 Referenced Document
- GB/T 12859.201-2012 Piezoelectric ceramic resonators.A specification in the IEC quality assessment system for electronic components (IECQ).Part 2-1:Blank detail specification.Assessment level E
- GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance
- GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
- GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*, 2019-06-04 Update
- GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings
- GB/T 2423.102 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)
- GB/T 2423.11 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
- GB/T 2423.12 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
- GB/T 2423.13 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
- GB/T 2423.14 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
- GB/T 2423.15 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady
- GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*, 2022-07-11 Update
- GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist
- GB/T 2423.18 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic(sodium chloride solution)*, 2021-05-21 Update
- GB/T 2423.19 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections*, 2013-11-12 Update
- GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
- GB/T 2423.20 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections*, 2014-09-30 Update
- GB/T 2423.21 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure
- GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*, 2012-12-31 Update
- GB/T 2423.23 Environmental testing.Part 2:Test methods.Test Q:Sealing*, 2013-11-12 Update
- GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*, 2022-07-11 Update
- GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests
- GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests
- GB/T 2423.27 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests*, 2020-06-02 Update
- GB/T 2423.28 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering
- GB/T 2423.29 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
- GB/T 2423.3 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state*, 2016-12-13 Update
- GB/T 2423.30 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents*, 2013-12-17 Update
- GB/T 2423.31 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
- GB/T 2423.32 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method
- GB/T 2423.33 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid*, 2021-05-21 Update
- GB/T 2423.34 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test*, 2012-12-31 Update
- GB/T 2423.35 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests*, 2019-06-04 Update
- GB/T 2423.36 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens
- GB/T 2423.37 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand
- GB/T 2423.38 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance*, 2021-05-21 Update
- GB/T 2423.39 Environmental testing—Part 2:Test methods—Test Ee and guidance:Loose cargo testing including bounce*, 2018-12-28 Update
- GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
- GB/T 2423.40 Environmental testing.Part 2:Test methods.Test Cx:Damp heat, steady state(unsaturated pressurized vapour)*, 2013-12-31 Update
- GB/T 2423.41 Environmental testing.Part 2:Test methods.Wind pressure*, 2013-11-12 Update
- GB/T 2423.42 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
- GB/T 2423.43 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests
- GB/T 2423.44 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
- GB/T 2423.45 Environmental testing.Part 2:Test methods.Test Z/ABDM:Climatic sequence*, 2012-12-31 Update
- GB/T 2423.46 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
- GB/T 2423.47 Environmental testing—Part 2: Test methods—Test Fg: Acoustic vibration*, 2018-12-28 Update
- GB/T 2423.48 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method*, 2018-12-28 Update
- GB/T 2423.49 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
- GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*, 2019-05-10 Update
- GB/T 2423.50 Environmental testing part 2: test method test Cy: constant damp heat is mainly used for accelerated testing of components
- GB/T 2423.51 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test*, 2020-06-02 Update
- GB/T 2423.52 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
- GB/T 2423.53 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
- GB/T 2423.54 Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination*, 2022-07-11 Update
- GB/T 2423.55 Environmental testing Part 2: Test methods Test Eh: Hammer test*, 2023-09-07 Update
- GB/T 2423.56 Environmental Testing Part 2: Test Method Test Fh: Broadband Random Vibration and Guidelines*, 2023-09-07 Update
- GB/T 2423.57 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis
- GB/T 2423.58 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode
- GB/T 2423.59 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)
- GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
- GB/T 2423.60 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices
- GB/T 2423.61 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen*, 2018-12-28 Update
- GB/T 2423.62 Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test*, 2018-12-28 Update
- GB/T 2423.63 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration(mixed mode)*, 2019-05-10 Update
- GB/T 2423.7 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment—type specimens*, 2018-12-28 Update
- GB/T 2423.8 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
- GB/T 2423.9 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
- GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
- GB/T 321-2005 Preferred numbers-Series of preferred numbers
- IEC 60642:1979 Piezoelectric ceramic resonators and resonator units for frequency control and selection. Chapter I: Standard values and conditions. Chapter II: Measuring and test conditions
GB/T 12859.2-2012 history
- 2012 GB/T 12859.2-2012 Piezoelectric ceramic resonators.A specification in the IEC quality assessment system for electronic components (IECQ).Part 2:Sectional specification.Qualification approval
- 1991 GB/T 12862-1991 Piezoelectric ceramic resonators for use in electronic equipment--Sectional specification for piezoeletric ceramic resonators for high frequency
GB/T 12859.2-2012 Piezoelectric ceramic resonators.A specification in the IEC quality assessment system for electronic components (IECQ).Part 2:Sectional specification.Qualification approval has been changed from GB/T 12860-1991 Piezoelectric ceramic resonators for use in electronic equipment--Sectional specification for piezoelectric ceramic resonators for low frequency.
GB/T 12859.2-2012 Piezoelectric ceramic resonators.A specification in the IEC quality assessment system for electronic components (IECQ).Part 2:Sectional specification.Qualification approval has been changed from GB/T 12862-1991 Piezoelectric ceramic resonators for use in electronic equipment--Sectional specification for piezoeletric ceramic resonators for high frequency.