GB/T 13163.2-2005
Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part2:Specific requirements for radon measruing instruments (English Version)

Standard No.

GB/T 13163.2-2005

Language

Chinese, Available in English version

Release Date

2005

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2021-12

Replace By

GB/T 13163.2-2021

Latest

GB/T 13163.2-2021

Scope

This section applies to instruments for measuring radon volume activity in workplaces, residences, outdoors and soil. The method of measurement depends on the specific purpose, but these requirements apply to instruments commonly used in radiation protection or research. This section applies to grab sampling, continuous sampling and cumulative sampling of various types of radon measuring instruments. The radon concentration is determined by pumping or diffusing radon-containing air into the detector or by measuring the activity of a grab sample at a specific moment. This part specifies the main performance characteristics, test methods and documentation requirements of instruments for measuring radon gas volume activity. This section is used together with "Radon and Radon Progeny Measuring Instruments for Radiation Protection - Part 1: General Requirements".

GB/T 13163.2-2005 Referenced Document

• GB/T 2423.1 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold*， 2008-12-30 Update
• GB/T 2423.10 Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal)*， 2019-06-04 Update
• GB/T 2423.101 Environmental testing for electric and electronic products.Part 2:Test methods.Test: Inclinations and swings*， 2008-05-20 Update
• GB/T 2423.102 Environmental testing for electric and electronic products.Part 2:Test method.Test:combined temperature(cold and heat)/low air pressure/vibration(sinusoidal)*， 2008-05-20 Update
• GB/T 2423.11 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fd: Random vibration wide band--General requirements
• GB/T 2423.12 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fda: Random vibration wide band--Reproducibility high
• GB/T 2423.13 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdb: Random vibration wide band--Reproducibility medium
• GB/T 2423.14 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fdc: Random vibration wide band--Reproducibility low
• GB/T 2423.15 Environmental testing for electric and electronic products.Part 2:Tests methods.Test Ga and guidance:Acceleration,steady*， 2008-03-24 Update
• GB/T 2423.16 Environmental testing—Part 2: Test methods—Test J and guidance: Mould growth*， 2022-07-11 Update
• GB/T 2423.17 Environmental testing for electric and electronic products.Part 2:Test method.Test Ka:Salt mist*， 2008-05-19 Update
• GB/T 2423.18 Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution）*， 2021-05-21 Update
• GB/T 2423.19 Environmental testing.Part 2:Test methods.Test Kc:Sulphur dioxide test for contacts and connections*， 2013-11-12 Update
• GB/T 2423.2 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat*， 2008-12-30 Update
• GB/T 2423.20 Environmental testing.Part 2: Test methods.Test Kd: Hydrogen sulphide test for contacts and connections*， 2014-09-30 Update
• GB/T 2423.21 Environmental testing for electric and electronic products.Part 2 Test methods Test M:Low air pressure*， 2008-12-30 Update
• GB/T 2423.22 Environmental testing.Part 2:Test methods.Test N:Change of temperature*， 2012-12-31 Update
• GB/T 2423.23 Environmental testing.Part 2:Test methods.Test Q:Sealing*， 2013-11-12 Update
• GB/T 2423.24 Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering*， 2022-07-11 Update
• GB/T 2423.25 Environmental testing for electric and electronic products.Part2:Tsets Tset Z/AM:Combined cold/low air pressure tests*， 2008-12-30 Update
• GB/T 2423.26 Environmental testing for electric and electronic products.Part 2 Test methods TestZ/BM:Combined dry heat/low air pressure tests*， 2008-12-30 Update
• GB/T 2423.27 Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests*， 2020-06-02 Update
• GB/T 2423.28 Environmental testing for electric and electronic products.Part2:Test methods-Test T:Soldering*， 2005-08-26 Update
• GB/T 2423.29 Environmental testing for electric and electronic products-- Part 2:Test methods Test U:robustness of terminations and integral mounting devices
• GB/T 2423.3 Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state*， 2016-12-13 Update
• GB/T 2423.30 Environmental testing.Part 2:Test methods.Test XA and guidance:Immersion in cleaning solvents*， 2013-12-17 Update
• GB/T 2423.31 Basic environmental testing procedures for electric and electronic products--Test:inclinations and motions
• GB/T 2423.32 Environmental testing for electric and electronic products.Part 2:Test methods.Test Ta:Solderability test by the wetting balance method*， 2008-03-24 Update
• GB/T 2423.33 Environmental testing—Part 2: Test methods—Test Kca: High concentration sulfur dioxid*， 2021-05-21 Update
• GB/T 2423.34 Environmental testing.Part 2:Test methods.Test Z/AD:Composite temperature/humidity cyclic test*， 2012-12-31 Update
• GB/T 2423.35 Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests*， 2019-06-04 Update
• GB/T 2423.36 Environmental testing for electric and electronic products Part.2:Tests Tests Z/BFc:Combined dry heat/vibration(sinusoidal)tests for both heat-dissipating and non-heat-dissipating specimens*， 2005-08-26 Update
• GB/T 2423.37 Environmental testing for electric and electronic products Part 2: Test methods Test L: Dust and sand*， 2006-12-19 Update
• GB/T 2423.38 Environmental testing—Part 2:Test methods—Test R:Water test method and guidance*， 2021-05-21 Update
• GB/T 2423.39 Environmental testing—Part 2：Test methods—Test Ee and guidance：Loose cargo testing including bounce*， 2018-12-28 Update
• GB/T 2423.4 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)*， 2009-01-01 Update
• GB/T 2423.40 Environmental testing.Part 2:Test methods.Test Cx:Damp heat, steady state(unsaturated pressurized vapour)*， 2013-12-31 Update
• GB/T 2423.41 Environmental testing.Part 2:Test methods.Wind pressure*， 2013-11-12 Update
• GB/T 2423.42 Basic environmental testing procedures for electric and electronic products. Combined low temperature/low air pressure/vibration(sinusoidal)test
• GB/T 2423.43 Environmental testing for electric and electronic products.Part 2:Test method.Mounting of specimens for vibration,impact and similar dynamic tests*， 2008-05-19 Update
• GB/T 2423.44 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eg:Impact, spring hammer
• GB/T 2423.45 Environmental testing.Part 2:Test methods.Test Z/ABDM:Climatic sequence*， 2012-12-31 Update
• GB/T 2423.46 Environmental testing for electric and electronic products. Part 2: Tests methods. Test Ef: Impact, pendulum hammer
• GB/T 2423.47 Environmental testing—Part 2: Test methods—Test Fg: Acoustic vibration*， 2018-12-28 Update
• GB/T 2423.48 Environmental testing—Part 2:Test methods—Test Ff: Vibration—Time-history and sine-beat method*， 2018-12-28 Update
• GB/T 2423.49 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fe:Vibration--sine-beat method
• GB/T 2423.5 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock*， 2019-05-10 Update
• GB/T 2423.50 Environmental testing part 2: test method test Cy: constant damp heat is mainly used for accelerated testing of components*， 2012-11-05 Update
• GB/T 2423.51 Environmental testing—Part 2: Test methods—Test Ke: Flowing mixed gas corrosion test*， 2020-06-02 Update
• GB/T 2423.52 Environmental testing for electric and electronic products-Part 2:Test methods-Test 77:Body strength and impact shock
• GB/T 2423.53 Environmental testing for electric and electronic products-Part 2:Test methods-Test Xb:Abrasion of markings and letterings caused by rubbing of fingers and hands
• GB/T 2423.54 Environmental testing—Part 2: Test methods—Test Xc: Fluid contamination*， 2022-07-11 Update
• GB/T 2423.55 Environmental testing Part 2: Test methods Test Eh: Hammer test*， 2023-09-07 Update
• GB/T 2423.56 Environmental Testing Part 2: Test Method Test Fh: Broadband Random Vibration and Guidelines*， 2023-09-07 Update
• GB/T 2423.57 Environmental testing for electric and electronic products.Part 2: Tests.Test Ei: Shock.Shock response spectrum synthesis*， 2008-05-19 Update
• GB/T 2423.58 Enviromental testing for electric and electonic products.Part2:Tests methods.Test Fi:Vibration.Mixed Mode*， 2008-05-19 Update
• GB/T 2423.59 Environmental testing for electric and electronic products.Part 2:Test methods.Test Z/ABMFh:Combined temperature(cold and heat)/low air pressure/vibration(random)*， 2008-12-30 Update
• GB/T 2423.6 Environmental testing for electric and electronic products. Part 2: Test methods. Test Eb and guidance: Bump
• GB/T 2423.60 Environmental testing for electric and electronic products.Part 2:Test methods.Test U:Robustness of terminations and integral mounting devices*， 2008-12-30 Update
• GB/T 2423.61 Environmental testing—Part 2:Test methods—Test and guidance:Dust and sand test for large specimen*， 2018-12-28 Update
• GB/T 2423.62 Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test*， 2018-12-28 Update
• GB/T 2423.63 Environmental testing—Part 2:Test methods—Test: combined temperature(cold and heat)/low air pressure/vibration（mixed mode）*， 2019-05-10 Update
• GB/T 2423.7 Environmental testing—Part 2：Test methods—Test Ec：Rough handling shocks，primarily for equipment—type specimens*， 2018-12-28 Update
• GB/T 2423.8 Environmental testing for electric and electronic products. Parts 2: Test methods. Test Ed: Free fall
• GB/T 2423.9 Environmental testing for electric and electronic products Part 2: Test methods Test Cb: Damp heat,steady state,primarily for equipment
• GB/T 4960.1 Glossary of nuclear science and technology terms.Part 1: Nuclear physics and nuclear chemistry*， 2011-01-10 Update
• GB/T 4960.2 Terminology of Nuclear Science and Technology Part 2: Fission Reactors*， 2023-11-27 Update
• GB/T 4960.3 Glossary of nuclear science and technology terms.Part 3:Nuclear fuel and nuclear fuel cycle*， 2010-11-10 Update
• GB/T 4960.4 Glossary of terms: nuclear science and technology radionuclide
• GB/T 4960.5 Clossary of terms: Nuclear science and technology. Radiation protection and safety of radiation sources
• GB/T 4960.6 Glossary of terms for nuclear science and technology.Part 6: Nuclear instrumentation*， 2008-09-19 Update
• GB/T 4960.7 Nuclear Science and Technology Terminology Part 7: Nuclear Material Control and Nuclear Safeguards*， 2023-12-28 Update
• GB/T 4960.8 Glossary of term:nuclear science and technology.Part 8:Radioactive waste management*， 2008-03-24 Update
• GB/T 4960.9 Glossary of nuclear science and technology terms.Part 9:Magnetic confinement fusion*， 2013-02-07 Update
• IEC 61187:1993 Electrical and electronic measuring equipment; documentation
• IEC 61577-1:2000 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 1: General requirements
• IEC 61577-4 Radiation protection instrumentation - Radon and radon decay product measuring instruments - Part 4: Equipment for the production of reference atmospheres containing radon isotopes and their decay products (STAR)*， 2009-02-01 Update

GB/T 13163.2-2005 history

• 2021 GB/T 13163.2-2021 Radiation protection instrumentation—Radon and radon decay product measuring instruments—Part 2：Specific requirements for 222Rn and 220Rn measuring instruments
• 2005 GB/T 13163.2-2005 Radiation protection instrumentation.Radon and radon decay product measuring instruments.Part2:Specific requirements for radon measruing instruments

GB/T 13163.2-2005 -All Parts