GB/T 14542-2017
Guide for maintenance and supervision of transformer oil (English Version)

Standard No.
GB/T 14542-2017
Language
Chinese, Available in English version
Release Date
2017
Published By
中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会
Latest
GB/T 14542-2017
Replace
GB/T 14542-2005
Scope
This standard specifies the principles of transformer oil maintenance and management. This standard applies to power transformers, reactors, transformers, oil-filled bushings and other oil-filled electrical equipment. This standard does not apply to various synthetic insulating liquids.

GB/T 14542-2017 Referenced Document

  • DL/T 1096 Limited value of particulate pollutant of transformer oils*2018-04-03 Update
  • DL/T 1355 Method for determination of furfural content in transformer oil by HPLC
  • DL/T 1459 Quantitative determination of metal passivators in mineral insulating oils (HPLC)
  • DL/T 1552 Guide for storage and supervision of transformer oil
  • DL/T 285 Test method for corrosive sulphur in mineral insulating oils Copper conductor wrapped with insulating paper
  • DL/T 385 Method for detecting electrification tendency of transformer oil
  • DL/T 419 Glossary on electric power oil
  • DL/T 429.6 Determination of open cup ageing of power oils
  • DL/T 429.7 Determination method of oil sludge precipitation for electric power*2017-08-02 Update
  • DL/T 432 Determination method of particle size in electric power oil*2018-04-03 Update
  • DL/T 596 Rules for preventive testing of electrical equipment
  • DL/T 703 Determination of dissolved gas content in insulating oil by gas chromatography
  • DL/T 722 Guide to the analysis and the diagnosis of gases dissolved in transformer oil
  • GB 2536 Fluids for electrotechnical applications.Unused mineral insulating oils for transformers and switchgear
  • GB 50150 Electric equipment installation engineering-standard for hand-over test of electric equipment
  • GB/T 14542 Guide for maintenance and supervision of transformer oil
  • GB/T 261 Determination of flash point—Pensky-Martens closed cup method*2021-10-11 Update
  • GB/T 264 Petroleum products--Determination of acid number
  • GB/T 507 Insulating liquids--Determination of the breakdown voltage at power frequency
  • GB/T 5654 Insulating liquids.Measurement of relative permittivity,dielectric dissipation factor and d.c.resistivity
  • GB/T 6540 Petroleum products--Determination of colour
  • GB/T 6541 Petroleum products--Mineral oils--Determination of interfacial tension of oil against water--Ring method
  • GB/T 7595 Quality of transformer oils in service
  • GB/T 7597 Method of sampling for transformer and turbine oils in electric power industry
  • GB/T 7598 Determination of water-solube acid in transformer oils in service
  • GB/T 7600 Determination of water content in transformer oils and turbine oils in service by coulometric method
  • GB/T 8926-2012 Standard test method for insolubles in used lubricating oils
  • IEC 60422 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance; Corrigendum 1
  • IEC 62697-1 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
  • NB/SH/T 0810 Gassing of insulating liquids under electrical stress and ionization
  • NB/SH/T 0812 Mineral insulating oils-Method for the determination of 2-furfural and related compounds
  • SH/T 0802 Determination of 2,6-bi-tert-butyl-paracresol in insulating oils

GB/T 14542-2017 history

  • 2017 GB/T 14542-2017 Guide for maintenance and supervision of transformer oil
  • 2005 GB/T 14542-2005 Guide for maintenance and supervision of transformer oil in service
  • 1993 GB/T 14542-1993 Guide for maintenance and supervision of transformeroil in service
Guide for maintenance and supervision of transformer oil



Copyright ©2024 All Rights Reserved