GB/T 20818.1-2015 Industrial-process measurement and control.Data structures and elements in process equipment catalogues.Part 1:Measuring equipment with analogue and digital output (English Version)
This part of GB/T 20818 gives the general structure that should be adopted for the catalog of process equipment classified by product characteristics for industrial process measurement and control equipment with analog or digital output, so that it is helpful when the product is handed over from one party to another Understand product descriptions. This section applies to product manufacturers to compile catalogs of process measurement equipment and to help users order. This section can also be used as a reference document for all subsequent standards related to the catalog of process measurement equipment. In addition, this part of ISO/IEC 20000 can be used as a guide for future development of standards related to the documentation of process equipment such as other kinds of measuring equipment and actuators.
GB/T 20818.1-2015 Referenced Document
GB 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 17214.1-1998 Industrial-process measurement and control equipment--Operating conditions. Part 1: Climatic conditions
GB/T 17614.1-2015 Transmitters for use in industrial-process control systems.Part 1:Methods for performance evaluation
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.10 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test*, 2017-12-29 Update
GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*, 2023-05-23 Update
GB/T 17626.12 Electromagnetic Compatibility Testing and Measurement Techniques Part 12: Ringing Wave Immunity Test*, 2023-03-17 Update
GB/T 17626.13 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.14 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.15 Electromagnetic compatibility.Testing and measurement techniques .Flickermeter.Functional and design specifications
GB/T 17626.16 Electromagnetic compatibility Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 17626.19 Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.*, 2022-12-30 Update
GB/T 17626.20 Electromagnetic compatibility.Testing and measurement techniques.Emission and immunity testing in transverse electromagnetic (TEM) waveguide
GB/T 17626.21 Electromagnetic compatibility.Testing and measurement techniques.Reverberation chamber test methods
GB/T 17626.22 Electromagnetic compatibility (EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs)*, 2017-12-29 Update
GB/T 17626.24 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance
GB/T 17626.27 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.28 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.30 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods*, 2023-12-28 Update
GB/T 17626.34 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 17626.7 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto*, 2017-07-12 Update
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility. Testing and measurement techniques. Pulse magnetic field immunity test
GB/T 18268.1-2010 Electrical equipment for measurement,control and laboratory use.EMC requirements.Part 1:General requirements
GB/T 18271.2-2000 Process measurement and control devices-General methods and procedures for evaluating performance-Part 2:Tests under reference conditions
GB/T 18271.3-2000 Process measurement and control devices--General methods and procedures for evaluating performance--Part 3: Tests for the effects of influence quantities
GB/T 18271.4-2000 Process measurement and control devices-General methods and procedures for evaluating performance-Part 4:Evaluation report content
GB/T 18272.5-2000 Industrial-process measurement and control--Evaluation of system properties for the purpose of system assessment Part 5: Assessment of system dependability
GB/T 18272.6-2006 Industrial-process measurement and control.Evaluation of system properties for the purpose of system assessment.Part 6:Assessment of system operability
GB/T 20818.1-2015 history
2015GB/T 20818.1-2015 Industrial-process measurement and control.Data structures and elements in process equipment catalogues.Part 1:Measuring equipment with analogue and digital output
2007GB/T 20818.1-2007 Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 1: Measuring equipment with analogue and digital output