CB/T 3367-2013
Technical requirements for painting cargo tanks of product carrier and chemical tanker (English Version)

Standard No.

CB/T 3367-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard-Ships

Latest

CB/T 3367-2013

Replace

CB/T 3367-1992

Scope

This standard specifies the coating construction process, construction environment, technical requirements and testing methods for newly built product oil tankers and chemical tanker cargo tanks. This standard applies to the coating construction of cargo tanks of product oil tankers and chemical tankers carrying petroleum products, chemicals, animal and vegetable oils and edible products, the repair and renewal of cargo tanks of product oil tankers and chemical tankers, and other containers containing the above products. Painting construction can also be used as a reference.

CB/T 3367-2013 Referenced Document

• CB 3381 Safety regulations for ship painting operations
• CB/T 3718 Inspection requirement of coating film thickness for ship*， 2016-04-05 Update
• GB 6514 Safety code of practice for coating—Safety and ventilation for coating process*， 2023-12-28 Update
• GB 7691 Safety code for painting--Safety management general rule
• GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
• GB/T 13288.2 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned steel substrates.Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel.Comparator procedure
• GB/T 17849 Preparation of steel substrates before application of paints and related products--Test methods for non-metallic blast-cleaning abrasives
• GB/T 17850.3 Preparation of steel substrates before application of paints and related products--Specifications for non-metallic blast-cleaning abrasives--Copper refinery slag
• GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
• GB/T 18570.6 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 6:Extraction of soluble contaminants for analysis.The Bresle method
• GB/T 18570.9 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
• GB/T 18838.3 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 3:High-carbon cast-steel shot and grit
• GB/T 18838.4 Preparation of steel substrates before application of paints and related products.Specifications for metallic blast-cleaning abrasives.Part 4:Low-carbon cast-steel shot
• GB/T 19816.1 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 1:Sampling
• GB/T 19816.2 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 2:Determination of particle size distribution
• GB/T 19816.3 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 3:Determination of hardness
• GB/T 19816.4 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 4:Determination of apparent density
• GB/T 19816.5 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 5:Determination of percentage defective particles and of microstructure
• GB/T 19816.6 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 6:Determination of foreign matter
• GB/T 19816.7 Preparation of steel substrates before application of paints and related products.Test methods for metallic blast-cleaning abrasives.Part 7:Determination of moisture
• GB/T 8923.1 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
• GB/T 8923.3 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 3:Preparation grades of welds,edges and other areas with surface imperfections

CB/T 3367-2013 history

• 2013 CB/T 3367-2013 Technical requirements for painting cargo tanks of product carrier and chemical tanker
• 1993 CB/T 3367-1992 Technical requirements for coating process of cargo oil tanks of product oil tankers