EJ/T 1197-2007 Testing method and environment condition for qualification of electrical equipment of the safety system in nuclear power plants (English Version)
This standard specifies the test methods and typical environmental conditions (including normal environmental conditions and design basis accident environmental conditions) used for quality qualification of safety-level electrical equipment in nuclear power plants. This standard is applicable to the test methods and environmental conditions for quality qualification of electrical equipment for the safety system of pressurized water reactor nuclear power plants (including interface components or equipment whose failure has a harmful impact on the performance of the safety system) designed and constructed in accordance with the French RCC series of specifications. Other pressurized water reactor nuclear power plants can refer to the implementation after confirming the environmental conditions of the plant design.
EJ/T 1197-2007 Referenced Document
GB/T 12727-2002 Nuclear power plants--Electrical equipment of the safety system-Qualification
GB/T 13625-1992 Seismic qualification of electrical equipment of the safety system for nuclear power plants
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.10 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test*, 2017-12-29 Update
GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*, 2023-05-23 Update
GB/T 17626.12 Electromagnetic Compatibility Testing and Measurement Techniques Part 12: Ringing Wave Immunity Test*, 2023-03-17 Update
GB/T 17626.13 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.14 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.15 Electromagnetic compatibility.Testing and measurement techniques .Flickermeter.Functional and design specifications *, 2011-12-30 Update
GB/T 17626.16 Electromagnetic compatibility Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 17626.19 Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.*, 2022-12-30 Update
GB/T 17626.20 Electromagnetic compatibility.Testing and measurement techniques.Emission and immunity testing in transverse electromagnetic (TEM) waveguide*, 2014-12-22 Update
GB/T 17626.21 Electromagnetic compatibility.Testing and measurement techniques.Reverberation chamber test methods*, 2014-12-22 Update
GB/T 17626.22 Electromagnetic compatibility (EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs)*, 2017-12-29 Update
GB/T 17626.24 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance*, 2012-11-05 Update
GB/T 17626.27 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.28 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.30 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods*, 2023-12-28 Update
GB/T 17626.34 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase*, 2012-06-29 Update
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 17626.7 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto*, 2017-07-12 Update
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility. Testing and measurement techniques. Pulse magnetic field immunity test *, 2011-12-30 Update
GB/T 2421-1999 Environmental testing for electric and electronic products Part 1: General and guidance
GB/T 2423.1-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests A: Cold
GB/T 2423.10-1995 Environmental testing for electric and electronic products. Part 2: Test methods. Test Fc and guidance: Vibration (Sinusoidal)
GB/T 2423.2-2001 Environmental testing for electric and electronic products Part 2: Test methods Tests B: Dry heat
GB/T 2423.22-2002 Environmental testing for electric and electronic products--Part 2: Test methods Test N: Change of temperature
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products. Test Ca:Damp heat,steady state
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products. Test Db:Damp heat,cyclic
GB/T 2423.48-1997 Environmental testing for electric and electronic products. Part 2: Test methods. Test Ff: Vibration--Time-history method
GB/T 2424.25-2000 Environmental testing for electric and electronic products-Part 3:Test guidance Seismic test methods
GB/T 4859-1984 General methods of measurement of immunity to interference for electrical equipment
EJ/T 1197-2007 history
2007EJ/T 1197-2007 Testing method and environment condition for qualification of electrical equipment of the safety system in nuclear power plants