GB/Z 17624.2-2013 Electromagnetic compatibility.General.Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/Z 17624.2-2013
Scope
This guiding technical document establishes a set of methods for the realization of functional safety related only to electromagnetic phenomena for electrical and electronic systems and devices when they are installed and used in operating conditions. The method also relates to the instrumentation used in these systems and devices. This guidance technical document: a) applies to safety-related systems containing electrical/electronic/programmable electronic equipment; b) considers the influence of the electromagnetic environment on safety-related systems; it is intended for designers, manufacturers and It is written by the installer and can be used as a guideline of the relevant standardization technical committee; c) It does not consider the direct harm caused by electromagnetic fields to life, nor does it consider the safety of electrical hazards caused by insulation damage or other mechanical failures. It mainly covers the electromagnetic compatibility (EMC) related parts of safety-related systems and equipment used in the design phase, and especially involves -- some basic content in the field of functional safety, -- various EMC-specific methods for managing and implementing functional safety ,--Description and assessment of the electromagnetic environment,-- Regarding the EMC design and integration process, this process should consider the EMC safety plan preparation process at both the system level and the equipment level,--The relevant confirmation and verification process of electromagnetic disturbance immunity ,--Considerations on the performance criteria of safety-related systems and their equipment and some test principles,--Parts of the immunity test of safety-related systems and their equipment to electromagnetic disturbances. This guidance technical document applies to safety-related systems that are required to meet the requirements of IEC 61508 and/or related field-specific functional safety standards. For safety-related systems covered by other functional safety standards, in order to prove whether the relevant methods selected for EMC and functional safety are appropriate, the requirements of this technical guidance document may be considered. For other systems that directly serve safety, this guidance technical document can also be used as a guide when considering EMC requirements.
GB/Z 17624.2-2013 Referenced Document
GB/T 16499-2008 The preparation of safety publications and the use of basic safety publications and group safety publications
GB/T 17626.1 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.1-2006 Electromagnetic compatibility Testing and measurement techniques Overview of immunity test
GB/T 17626.10 Electromagnetic compatibility—Testing and measurement techniques—Damped oscillatory magnetic field immunity test*, 2017-12-29 Update
GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*, 2023-05-23 Update
GB/T 17626.12 Electromagnetic Compatibility Testing and Measurement Techniques Part 12: Ringing Wave Immunity Test*, 2023-03-17 Update
GB/T 17626.13 Electromagnetic compatibility Testing and measurement techniques Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity test
GB/T 17626.14 Electromagnetic compatibility Testing and measurement techniques Voltage fluctuation immunity test
GB/T 17626.15 Electromagnetic compatibility.Testing and measurement techniques .Flickermeter.Functional and design specifications
GB/T 17626.16 Electromagnetic compatibility Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.17 Electromagnetic compatibility Testing and measurement techniques Ripple on d.c.input power port immunity test
GB/T 17626.19 Electromagnetic compatibility—Testing and measurement techniques—Part 19: Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c.*, 2022-12-30 Update
GB/T 17626.20 Electromagnetic compatibility.Testing and measurement techniques.Emission and immunity testing in transverse electromagnetic (TEM) waveguide*, 2014-12-22 Update
GB/T 17626.21 Electromagnetic compatibility.Testing and measurement techniques.Reverberation chamber test methods*, 2014-12-22 Update
GB/T 17626.22 Electromagnetic compatibility (EMC)—Testing and measurement techniques—Radiated emissions and immunity measurements in fully anechoic rooms(FARs)*, 2017-12-29 Update
GB/T 17626.24 Electromagnetic compatibility.Testing and measurement techniques.Test methods for protective devices for HEMP conducted disturbance
GB/T 17626.27 Electromagnetic compatibility Testing and measurement techniques Unbalance immunity test
GB/T 17626.28 Electromagnetic compatibility Testing and measurement techniques Variation of power frequency, immunity test
GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*, 2023-12-28 Update
GB/T 17626.30 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods*, 2023-12-28 Update
GB/T 17626.34 Electromagnetic compatibility.Testing and measurement techniques.Voltage dips,short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase
GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*, 2018-06-07 Update
GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*, 2017-12-29 Update
GB/T 17626.7 Electromagnetic compatibility—Testing and measurement techniques—General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto*, 2017-07-12 Update
GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
GB/T 17626.9 Electromagnetic compatibility. Testing and measurement techniques. Pulse magnetic field immunity test
GB/T 20438.1 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 1: General requirements*, 2017-12-29 Update
GB/T 20438.1-2006 Functional safety of electrical/ electronic/ programmable electronic safetyrelated systems. Part 1: General requirements
GB/T 20438.2 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 2:Requirements for electrical/electronic/programmable electronic safety-related systems*, 2017-12-29 Update
GB/T 20438.2-2006 Functional safety of electrical/ electronic/ programmable electronic safety-related systems. Part 2: Requirements for electrical/ electronic/ programmable electronic safety-related systems
GB/T 20438.3 Functional safety of electrical/electronic/programmable electronic safety-related systems Part 3: Software requirements*, 2018-07-01 Update
GB/T 20438.4 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 4: Definitions and abbreviations*, 2017-12-29 Update
GB/T 20438.4-2006 Functional safety of electrical/ electronic/ programmable electronic safety-related systems. Part 4: Definitions and abbreviations
GB/T 20438.5 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 5: Examples of methods for the determination of safety integrity levels*, 2017-12-29 Update
GB/T 20438.6 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3*, 2017-12-29 Update
GB/T 20438.7 Functional safety of electrical/electronic/programmable electronic safety-related systems—Part 7: Overview of techniques and measures*, 2017-12-29 Update
GB/Z 18039.1-2000 Electromagnetic compatibility-Environment-Classification of electromagnetic environments
GB/Z 17624.2-2013 history
2013GB/Z 17624.2-2013 Electromagnetic compatibility.General.Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena