This standard is applicable to the design, construction and acceptance of the anti-corrosion layer inside the liquid coating of steel storage tanks where the storage medium temperature does not exceed 120°C and the storage medium is crude oil, sewage, and clean water. The coatings used in domestic water tanks should comply with relevant national health standards.
SY/T 0319-2012 Referenced Document
GB 12942 Safety code for painting.Technical requirements of safety for working in confined spaces
GB 17930 Gasoline for motor vehicles*, 2016-12-23 Update
GB 5749 Hygienic Standards for Drinking Water*, 2022-03-15 Update
GB 7691 Safety code for painting--Safety management general rule
GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
GB/T 13452.2 Paints and varnishes.Determination of film thickness
GB/T 1408.1 Insulating materials.Test methods for electric strength.Part 1:Test at power frequencies*, 2016-12-13 Update
GB/T 1410 Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
GB/T 1724 Paints,varnishes and printing inks—Determination of fineness of grind*, 2019-03-25 Update
GB/T 1725 Paints,varnishes and plastics.Determination of non-volatile-matter content
GB/T 1728 Determination of drying time of coating and putty films*, 2020-11-19 Update
GB/T 1771 Paints and varnishes.Determination of resistance to neutral salt spray(fog)
GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 18570.5 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 5:Measurement of chloride on surfaces prepared for painting (ion detection tube method)
GB/T 3186 Paints, varnishes and raw materials for paints and varnishes. Sampling
GB/T 8923.1 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
SY/T 0063 Standard test methods for holiday detection in pipelines coatings
SY/T 0407 Specification of steel surface preparation before application of paint
SY/T 0457 Technical standard of liquid epoxy internal coating for steel pipeline*, 2019-11-04 Update
SY/T 0319-2012 history
2021SY/T 0319-2021 Technical specifications for anti-corrosion coating of steel storage tanks
2012SY/T 0319-2012 Standard of liquid internal coatings for steel tank
1999SY/T 0319-1998 Technical standard of liquid epoxy internal coating for steel tank
SY/T 0319-2012 Standard of liquid internal coatings for steel tank was changed to LST EN 60068-2-78-2013 Environmental testing -- Part 2-78: Tests - Test Cab: Damp heat, steady state (IEC 60068-2-78:2012).