SY/T 0407-2012
Specification of steel surface preparation before application of paint (English Version)
- Standard No.
- SY/T 0407-2012
- Language
- Chinese, Available in English version
- Release Date
- 2012
- Published By
- Professional Standard - Petroleum
- Status
- Latest
- SY/T 0407-2012
- Replace By
- LST EN 61850-4-2011
- Replace
- SY/T 0407-1997
- Scope
- 1.0.1 This specification is formulated in order to ensure the quality of steel surface treatment before painting and improve the adhesion and coating quality of the coating. 1.0.2 This specification applies to the surface treatment of steel before painting. 1.0.3 In addition to complying with this specification, the surface treatment of steel materials before painting should also comply with the relevant national mandatory standards.
SY/T 0407-2012 Referenced Document
- GB 12942 Safety code for painting.Technical requirements of safety for working in confined spaces
- GB 2494 Bonded abrasive products.Safety requirements*， 2014-06-09 Update
- GB 3883.1 Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools.Part 1:General requirements*， 2014-12-05 Update
- GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
- GB/T 13288.1 Preparation of steel substrates before application of paints and related products.Surface roughness characteristics of blast-cleaned substrates.Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-c
- GB/T 1766 Paints and varnishes.Rating schemes of degradation of coats
- GB/T 18570.10 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 10:Field method for the titrimetric determination of water-soluble chloride
- GB/T 18570.2 Preparation of steel substrates before application of paints and related products.Tests for the assesssment of surface cleanliness.Part 2:Laboratory determination of chloride on cleaned surfaces
- GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
- GB/T 18570.9 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 9:Field method for the conductometric determination of water-soluble salts
- GB/T 8923 Rust grades and preparation grades of steel surfaces before application of paints and related products
- GBZ 1 Hygienic standards for the design of industrial enterprises
- YB/T 5149 cast steel shot
- YB/T 5150 Cast steel grit
- YB/T 5151 cast iron shot
- YB/T 5152 cast iron sand
SY/T 0407-2012 history
- 2012 SY/T 0407-2012 Specification of steel surface preparation before application of paint
- 1997 SY/T 0407-1997 Specification of steel surface preparation before application of paint
SY/T 0407-2012 Specification of steel surface preparation before application of paint was changed to LST EN 61850-4-2011 Communication networks and systems for power utility automation -- Part 4: System and project management (IEC 61850-4:2011).
