JB/T 10219-2011
Explosion-proof cranes with electric hoist (English Version)
- Standard No.
- JB/T 10219-2011
- Language
- Chinese, Available in English version
- Release Date
- 2011
- Published By
- Professional Standard - Machinery
- Latest
- JB/T 10219-2011
- Replace
- JB/T 10219-2001
- Scope
- This standard specifies the terms and definitions, classification and grouping, basic parameters, structural types and models, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of explosion-proof beam cranes with explosion-proof hoist as the lifting mechanism. This standard is applicable to explosion-proof beam cranes (hereinafter referred to as explosion-proof cranes) working in zones 1 and 2 of explosive gas environments and/or zones 21 and 22 of combustible dust environments, including explosion-proof electric single-girder cranes and explosion-proof electric suspensions. Cranes and explosion-proof electric hoist overhead cranes.
JB/T 10219-2011 Referenced Document
- GB 12476.1-2000 Electrical apparatus for use in the presence of combustible dust--Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation-Specification for apparatus
- GB 12476.2 Electrical apparatus for use in the presence of combustible dust.Part 2:Selection and installation
- GB 12476.3-2007 Electrical apparatus for use in the presence of combustible dust.Part 3: Classification of areas where combustible dusts are or may be present
- GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres-Part 1: General requirements
- GB 3836.14-2000 Electrical apparatus for explosive gas atmospheres. Part 14: Classification of hazardous areas
- GB 3836.15-2000 Electrical apparatus for explosive gas atmospheres. Part 15: Electrical installation in hazardous areas (other than mines)
- GB 3836.2 Explosive atmospheres.Part 2:Equipment protection by flameproof enclosures "d"
- GB 3836.3 Explosive atmospheres.Part 3:Equipment protection by increased safety "e"
- GB 3836.4 Explosive atmospheres.Part 4:Equipment protection by intrinsic safety "i"
- GB/T 10686 Testing method of copper alloy tools for explosive atmospheres*， 2013-10-10 Update
- GB/T 3811 Design rules for cranes
- ISO 4225:1994 Air quality; general aspects; vocabulary
- JB/T 10222-2011 Explosion-proof hoists
- JB/T 10833 Polyurethane buffer for cranes*， 2017-11-07 Update
- JB/T 1306 Electric single girder crane
- JB/T 2603 Electric under slung crane
- JB/T 3695 Overhead crane with electric hoist
- JB/T 8110.2 Rubber buffer for cranes
JB/T 10219-2011 history
- 2011 JB/T 10219-2011 Explosion-proof cranes with electric hoist
- 2001 JB/T 10219-2001 Specification for explosion-proof cranes with electric wire rope hoist
