GB/T 7134-2008
Poly(methyl methacrylate)cast sheets (English Version)
- Standard No.
- GB/T 7134-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 7134-2008
- Replace
- GB/T 7134-1996
- Scope
- This standard specifies the terms and definitions, composition, technical requirements, test methods, inspection rules, signs, packaging, transportation and storage of cast industrial plexiglass sheets. This standard applies to colorless and colored transparent, translucent or opaque plexiglass sheets with a thickness of 1.5mm to 50mm (hereinafter referred to as sheets) that are formed by bulk polymerization of methyl methacrylate in a specific mold. .
GB/T 7134-2008 Referenced Document
- GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
- GB/T 1036-2008 Test method for coefficient of linear thermal expansion of plastics between -30℃ and 30℃ with a vitreous silica dilatometer
- GB/T 1040.1-2006 Plastics.Determination of tensile properties.Part 1:General principles
- GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
- GB/T 1041-2008 Plastics.Determination of compressive properties*， 2008-09-04 Update
- GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
- GB/T 15596-1995 Plastics--Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or artificial light
- GB/T 16422.2-1999 Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
- GB/T 16422.4-1996 Plastics--Methods of exposure to laboratory light sources. Part 4: Open flame carbon arc lamp
- GB/T 2410-2008 Determination of light transmittance and haze of transparent plastics*， 2009-04-01 Update
- GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
- GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
- GB/T 3398.2-2008 Plastics.Determination of hardness.Part 2:Rockwell hardness
- GB/T 3681-2000 Plastics-Test method of exposure to weathering
- GB/T 9341-2008 Plastic.Determination of flexural properties
GB/T 7134-2008 history
- 2008 GB/T 7134-2008 Poly(methyl methacrylate)cast sheets
- 1996 GB/T 7134-1996 Poly (methyl methacrylate) cast sheets, rods and tubes
