- Standard No.
- GB/T 3398.2-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
-
GB/T 3398.2-2008
- Replace
-
GB/T 9342-1988
- Scope
- This part of GB/T 3398 specifies the method for determining the indentation hardness of plastics with Rockwell hardness tester M, L and R scales. The Rockwell hardness value is directly related to the indentation hardness of the plastic material; the higher the Rockwell hardness value, the harder the material. When using this method, due to partial overlap between the Rockwell hardness scales, it is possible for a simultaneous material to obtain different Rockwell hardness values on two different scales, both of which may be technically correct. For materials with high creep and high elasticity, the time factor of main load and initial load has a great influence on the test results. Appendix A specifies another method for determining Rockwell hardness using the Rockwell-α hardness scale, which shows the relationship between the Rockwell-α scale and GB/T 3398.1 hardness measurement.
GB/T 3398.2-2008 Referenced Document
- GB/T 2411-2008 Plastics and ebonite.Determination of indentation hardness by means of a durometer(shore hardness)
- GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
- GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method*, 2008-09-04 Update
- GB/T 6031-1998 Rubber, Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)
GB/T 3398.2-2008 history
- 2008 GB/T 3398.2-2008 Plastics.Determination of hardness.Part 2:Rockwell hardness
- 1988 GB/T 9342-1988 Plastics--Determination of hardness by the ball indentation method
GB/T 3398.2-2008 Plastics.Determination of hardness.Part 2:Rockwell hardness has been changed from GB/T 9342-1988 Plastics--Determination of hardness by the ball indentation method.