GB/T 14048.16-2006
Low-voltage switchgear and controlgear Part 8: Control units for buile-in thermal protection (PTC) for rotating electrical machines (English Version)
- Standard No.
- GB/T 14048.16-2006
- Language
- Chinese, Available in English version
- Release Date
- 2006
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- 2017-03
- Replace By
- GB/T 14048.16-2016
- Latest
- GB/T 14048.16-2016
- Scope
- This Part specifies the rules and industrial application of control units that respond to thermal detectors integrated with rotating electrical machines and perform switching functions in accordance with GB/T 13002-1991. For systems containing positive temperature coefficient (PTC) thermistor detectors with special characteristics, this standard specifies the rules for this type of system and its associated control units. The PT100 detector complies with IEC 60751-1983, which specifies the resistance value corresponding to the temperature of the detector. This section lists the coordination characteristic requirements when this particular PTC thermistor detector and its associated control unit (labeled "Type A detector" and "Type A control unit") are used in a thermal protection system.
GB/T 14048.16-2006 Referenced Document
- GB 4824-2004 Industrial,scientific and medical(ISM)radio-frequency equipment-Electromagnetic disturbance characteristics-Limits and methods of measurement
- GB 9254-1998 Information technology equipment--Radio disturbance characteristics--Limits and methods of measurement
- GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
- GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
- GB/T 7153-2002 Directly heated positive step-function temperature coefficient thermistors Part 1: Generic specification
GB/T 14048.16-2006 history
- 2017 GB/T 14048.16-2016 Low-voltage switchgear and controlgear - Part 8: Built-in thermal protection (PTC) control units for rotating electrical machines
- 2006 GB/T 14048.16-2006 Low-voltage switchgear and controlgear Part 8: Control units for buile-in thermal protection (PTC) for rotating electrical machines
GB/T 14048.16-2006 -All Parts
GB/T 14048.1-2023 Low voltage switchgear and controlgear Part 1: General principles
GB/T 14048.10-2016 Low-voltage switchgear and controlgear—Part 5-2: Control circuit devices and switching elements—Proximity switches
GB/T 14048.11-2016 Low-voltage switchgear and control gear.Part 6-1:Multiple function equipment.Transfer switching equipment
GB/T 14048.12-2016 Low-voltage switchgear and controlgear Part 4-3: Contactors and motor starters for AC semiconductor controllers and contactors for non-motor loads
GB/T 14048.13-2017 Low-voltage switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB)
GB/T 14048.14-2019 Low-voltage switchgear and controlgear—Part 5-5: Control circuit devices and switching elements—Electrical emergency stop device with mechanical latching function
GB/T 14048.15-2006 Low-voltage switchgear and controlgear Part 5-3: Control circuit devices and switching elements DC interface for proximity sensors and switching amplifiers (NAMUR)
GB/T 14048.16-2016 Low-voltage switchgear and controlgear - Part 8: Built-in thermal protection (PTC) control units for rotating electrical machines
GB/T 14048.17-2008 Low-voltage switchgear and controlgear.Part 5-4:Control circuit devices and switching elements.Method of assessing the performance of low-formance of low-energy contacts.Special tests
GB/T 14048.18-2016 Low-voltage switchgear and controlgear.Part 7-3:Ancillary equipment.Safety requirements for fuse terminal blocks
GB/T 14048.19-2013 Low-voltage switchgear and controlgear.Part 5-7: Control circuit devices and switching elements.Requirements for proximity devices with analogue output
GB/T 14048.2-2020 Low-voltage switchgear and controlgear—Part 2: Circuit-breakers
GB/T 14048.20-2013 Low-voltage switchgear and controlgear.Part 5-8:Control circuit devices and switching elements.Three-position enabling switches
GB/T 14048.21-2013 Low-voltage switchgear and controlgear.Part 5-9: Control circuit devices and switching elements.Flow rate switches
GB/T 14048.22-2022 Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors
GB/T 14048.23-2022 Low-voltage switchgear and controlgear—Part 9-1: Active arc-fault mitigation systems—Arc quenching devices
GB/T 14048.3-2017 Low-voltage switchgear and controlgear—Part3: Switches，disconnectors，switch-disconnectors and fuse-combination units
GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)
GB/T 14048.5-2017 Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices
GB/T 14048.6-2016 Low-voltage switchgear and controlgear—Part 4-2: Contactors and motor-starters—AC semiconductor motor controllers and starters (including soft-starters)
GB/T 14048.7-2016 Low-voltage switchgear and controlgear.Part 7-1:Ancillary equipment.Terminal blocks for copper conductors
GB/T 14048.8-2016 Low-voltage switchgear and controlgear.Part 7-2:Ancillary equipment.Protective conductor terminal blocks for copper conductors
GB/T 14048.9-2008 Low-voltage switchgear and controlgear - Section 6-2: Multiple function equipment control and protective switching devices (or equipment) (CPS)