YD/T 1312.1-2015
Requirements and measurement methods of electromagnetic compatibility for radio communication equipment.Part 1: Common technical requirements (English Version)

Standard No.
YD/T 1312.1-2015
Language
Chinese, Available in English version
Release Date
2015
Published By
Professional Standard - Post and Telecommunication
Latest
YD/T 1312.1-2015
Replace
YD/T 1312.1-2008
Scope
This part specifies the electromagnetic compatibility (EMC) limits, performance criteria and measurement methods for wireless communication equipment and its associated auxiliary equipment. This section applies to all types of wireless communications equipment except broadcast receivers. For specific products that are not suitable for testing in a laboratory environment (such as high-power radio transmitters), the equipment can be tested in the field. In this case, if there are no applicable field test standards and methods, then the rationale and limits used to evaluate the measurement method of the equipment under test shall be consistent with the provisions of this standard.

YD/T 1312.1-2015 Referenced Document

  • GB 17625.1 Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase)*2022-12-29 Update
  • GB 17625.2 Electromagnetic compatibility (EMC).Limits.Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16A per phase and not subject to conditional connection
  • GB 9254 Limits and methods of measurement of radio disturbance for information technology equipment
  • GB/T 17626.11 Electromagnetic Compatibility Testing and Measurement Techniques Part 11: Voltage Dips, Short Interruptions and Voltage Variation Immunity Tests for Equipment with Input Current Less than or Equal to 16 A per Phase*2023-05-23 Update
  • GB/T 17626.2 Electromagnetic compatibility.Testing and measurement techniques.Electrostatic discharge immunity test*2018-06-07 Update
  • GB/T 17626.29 Electromagnetic compatibility Testing and measurement techniques Voltage dips, short interruptions and voltage variations on d.c.input power port immunity tests
  • GB/T 17626.3 Electromagnetic compatibility test and measurement technology Part 3: Radio frequency electromagnetic field radiation immunity test*2023-12-28 Update
  • GB/T 17626.4 Electromagnetic compatibility-Testing and measurement techniques-Electrical fast transient/burst immunity test*2018-06-07 Update
  • GB/T 17626.5 Electromagnetic compatibility—Testing and measurement techniques-Surge immunity test*2019-06-04 Update
  • GB/T 17626.6 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields*2017-12-29 Update
  • GB/T 17626.8 Electromagnetic compatibility Testing and measurement techniques Power frequency magnetic field immunity test
  • GB/T 18655 Vehicles, boats and internal combustion engines—Radio disturbance characteristics—Limits and methods of measurement for the protection of on-board receivers*2018-07-13 Update
  • GB/T 21437.2 Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only*2021-12-31 Update
  • GB/T 6113.101 Specification for radio disturbance and immunity measuring apparatus and methods—Part 1-1: Radio disturbance and immunity measuring apparatus—Measuring apparatus*2021-12-31 Update
  • GB/T 6113.104-2008 Specification for radio disturbance and immunity measuring apparatus and methods.Part 1-4:Radio disturbance and immunity measuring apparatus.Ancillary equipment.Radiated disturbances
  • GB/T 6113.203-2008 Specification for radio disturbance and immunity measuring apparatus and methods.Part 2-3:Methods of measurement of disturbances and immunity.Radiated disturbance measurements
  • GB/Z 17625.3 Electromagnetic compatibility-Limits-Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16A
  • GB/Z 17625.6 Electromagnetic compatibility--Limits--Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16A
  • YD/T 1483 Technical requirement and measurement method of spurious emission of radio equipments*2016-07-01 Update

YD/T 1312.1-2015 history

  • 2015 YD/T 1312.1-2015 Requirements and measurement methods of electromagnetic compatibility for radio communication equipment.Part 1: Common technical requirements
  • 2008 YD/T 1312.1-2008 Requirements and Measurement Methods of Electromagnetic Compatibility for Radio Communication Equipment.Part 1:Common Technical Requirements
  • 2004 YD/T 1312.1-2004 Requirements and measurement methods of electromagnetic compatibility for radio communication equipment Part 1: common technical requirements



Copyright ©2024 All Rights Reserved