This standard applies to the design, material inspection, construction and acceptance of coal tar enamel exterior anti-corrosion coatings for buried steel pipelines. This standard is applicable to the coal tar enamel outer anti-corrosion coating of steel pipelines whose transmission medium temperature is not higher than 95°C.
SY/T 0379-2013 Referenced Document
GB 4916 Emission standards for pollutants from asphalt industry
GB 50369 Code for construction and acceptance of oil and gas long-distance transmission pipeline engineering*, 2014-05-29 Update
GB 7692 Safety code for painting.Safety、ventilation and air clean-up for pretreatment process of painting
GB/T 16578.2 Plastics.Film and sheeting.Determination of tear resistance.Part 2:Elmendorf method
GB/T 1725 Paints,varnishes and plastics.Determination of non-volatile-matter content
GB/T 1728 Determination of drying time of coating and putty films*, 2020-11-19 Update
GB/T 18570.3 Preparation of steel substrates before application of paints and related products.Tests for the assessment of surface cleanliness.Part 3:Assessment of dust on steel surface prepared for painting (pressure-sensitive tape method)
GB/T 21929 Test method for flash point by tag closed cup tester
GB/T 4472 Detemination of density and relative density for chemical products
GB/T 4507 Standard test method for softening point of bitumen.Ring-and-ball apparatus*, 2014-02-19 Update
GB/T 4509 Standard test method for penetration of bitumen
GB/T 451.3 Paper and board determination of thickness
GB/T 5211.18 General methods of test for pigments and extenders.Part 18 : Determination of residue on sieve.Water method (Manual procedure)*, 2015-05-15 Update
GB/T 6003.1 Test sieves—Technical requirements and testing—Part 1:Test sieves of metal wire cloth*, 2022-10-12 Update
GB/T 6003.2 Test sieves.Technical requirements and testing.Part 2:Test sieves of metal wire cloth
GB/T 6753.4 Paints and varnishes--Determination of flow time by use of flow cups
GB/T 8923.1 Preparation of steel substrates before application of paints and related products.Visual assessment of surface cleanliness.Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coa
SY/T 0379-2013 history
2013SY/T 0379-2013 Standard of coal tar enamel external protective coating for buried steel pipeline
1999SY/T 0379-1998 Standard of coal tar enamel external protective coating for buried steel pipeline