This part of GB/T 17626 specifies the measurement methods and interpretation of measurement results for power quality parameters in 50Hz AC power supply systems. The measurement methods of each relevant parameter are described in terms that can provide reliable and repeatable results, but do not involve the means of realization of the measurement methods. This section deals with field measurement methods. This section applies to the measurement of the parameters referred to only in power systems that can handle voltage phenomena. The power quality parameters involved in this section refer to grid frequency, supply voltage amplitude, flicker, supply voltage dips and swells, voltage interruptions, transient voltages, supply voltage unbalance, voltage harmonics and interharmonics, supply voltage mid carrier signal and rapid voltage changes. Depending on the measurement purpose, it may be necessary to measure all or some of the above parameters. This section only provides measurement methods and corresponding performance requirements, and does not set thresholds. The role of sensors between the power supply system and instruments is well known, so it is not described in detail in this section, and only the precautions for installing monitors on live circuits are specified.
GB/T 17626.30-2012 Referenced Document
GB/T 17626.4-2008 Electromagnetic compatibility.Testing and measurement techniques.Electrical fast transient/burst immunity test
GB/T 17626.7-2008 Electromagnetic compatibility.Testing and measurement techniques.General guide on harmonics and interharmonics measurements and instrumentation,for power supply systems and equipment connected thereto
GB/T 18039.4 Electromagnetic compatibility—Environment—Compatibility levels in industrial plants for low-frequency conducted disturbances*, 2017-12-29 Update
IEC 61000-2-2:2002 Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
IEC 61000-3-8 Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
IEC 61000-4-7 Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
GB/T 17626.30-2012 history
2023GB/T 17626.30-2023 Electromagnetic compatibility test and measurement technology Part 30: Power quality measurement methods
2012GB/T 17626.30-2012 Electromagnetic compatibility.Testing and measurement techniques.Power quality measurement methods