GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector) (English Version)
This standard applies to the types of appliances specified in 1.1 and 1.2, the main contacts of which are used for connection to circuits with a rated voltage not exceeding 1000 V a.c. or 1500 V d.c. The starters and (or) contactors involved in this section are generally not used for breaking short-circuit currents. So proper short circuit protective devices form part of the equipment, but are not required for contactors or starters. This section applies to the following contactors and starters: contactors equipped with overload and (or) short-circuit protective devices; with separate short-circuit protective devices and (or) with separate short-circuit protective devices and their own overload protective devices Starter; After the contactor or starter is assembled with the short-circuit protective device according to the specified conditions, such as an integrated starter or a protective starter, it is regarded as an integral unit. In the integrated starter and protective starter, the circuit breaker or fuse combination as a short-circuit protection device should meet the requirements of GB 14048.2 and GB 14048.3 accordingly.
GB 14048.4-2010 Referenced Document
GB 755-2008 Rotating electrical machines.Rating and performance
GB/T 2421.1-2008 Environmental testing for electric and electronic products.General and guidance
GB/T 2423.1-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests A:Cold
GB/T 2423.10-2008 Environmental testing for electric and electronic products.Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.2-2008 Environmental testing for electric and electronic products.Part 2:Test methods.Tests B:Dry heat
GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2: Test method Test Db alternating damp heat (12h + 12h cycle)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes--Part 1: Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB 14048.4-2010 history
2020GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1: Contactors and motor-starters—Electromechanical contactors and motor-starters (Including motor protector)
2010GB 14048.4-2010 Low-voltage switchgear and controlgear.Part 4-1:Contactors and motor-starters.Electromechanical contactors and motor-starters (Including motor protector)
2003GB 14048.4-2003 Low-voltage switchgear and controlgear-Electromechanical contactors and motor-starters
1993GB 14048.4-1993 Low-voltage switchgear and controlgear. Low-voltage electromechanical contactors and motor starters