Warning: This standard involves some hazardous materials, operations and equipment, but does not make recommendations for all safety issues. Therefore, users should establish appropriate safety precautions and determine the applicability of relevant regulatory limitations before using this standard. See Appendix B for details on safety warnings. This standard specifies the test method for measuring the cetane number of diesel oil with a cetane number testing machine. This standard can also be used for unconventional fuels such as synthetic fuels, vegetable oils and similar products. Cetane numbers range from 0-100, but a typical cetane number test range is 30-65. This standard applies to the quantitative determination of cetane number of compression ignition engine fuel. The samples were tested by a standard single-cylinder, four-stroke, variable compression ratio, indirect injection diesel engine under specified operating conditions.
GB/T 386-2010 Referenced Document
GB/T 1884 Crude petroleum and liquid petroleum products--Laboratory determination of density--Hydrometer method
GB/T 2430 Standard test method for freezing point of aviation fuels
GB/T 265 Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 4756 Method for manual sampling of petroleum liquids*, 2015-12-31 Update
GB/T 511 Petroleum,petroleum products and additives.Method for determination of machanical admixtures
GB/T 6536 Standard test method for distillation of petroleum products at atmospheric perssure
GB/T 6540 Petroleum products--Determination of colour
GB/T 6682 Water for analytical laboratory use.Specification and test methods
GB/T 6986 Standard test method for cloud point of petroleum products*, 2014-02-19 Update
SH/T 0234 Determination method for iodine value and unsaturated hydrocarbon content of light petroleum products (iodine-ethanol method)
SH/T 0236 Determination of Bromine Value of Petroleum Products
SH/T 0604 Crude petroleum and petroleum products.Determination of density.Oscillating U-tube Method
SH/T 0724 Test method for refractive index and refractive dispersion of hydrocarbon liquids