GB/T 17215.311-2008
Electricity metering equipment(a.c.).Particular requirements.Part 11:Electromechanical meter for active energy(class 0.5,1 and 2) (English Version)

Standard No.

GB/T 17215.311-2008

Language

Chinese, Available in English version

Release Date

2008

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 17215.311-2008

Replace

GB/T 15283-1994

Scope

This part of GB/T 17215 is only applicable to newly manufactured electromechanical active energy meters of class 0.5, class 1 and class 2 (hereinafter referred to as meters) and their type test. This standard applies to indoor and outdoor electromechanical energy meters consisting of measuring elements and one or more counters housed in the same case, and also applies to one or more operating indicators and one or more test output. If the meter has a measuring element to measure more than one type of energy meter (multi-energy meter), or when other functional elements, such as maximum demand indicator, electronic tariff meter, time switch, ripple control receiver, data communication interface etc. are also enclosed in the instrument case. Of course, the standards related to these components must also be applied. This standard is only applicable to the metering part. This part does not apply to: a) instruments whose terminal crossing voltage exceeds 600V (line-to-line voltage for polyphase instruments); b) portable instruments; c) data interfaces of instrument counters. The acceptance inspection shall be in accordance with the basic guidelines given in GB/T 3925-1983 "Acceptance Methods for Class 2.0 AC Watt-hour Meters" (eqv IEC 60514-1975). Reliability is in accordance with the content of the IEC 62059 "Reliability of Alternating Current Measuring Equipment" series of documents.

GB/T 17215.311-2008 Referenced Document

• GB/T 11150-2001 Testing equipment for electrical energy meters
• GB/T 17215.211-2006 Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment
• GB/T 3925-1983 Acceptance inspection of class 2 alternating current watt-hour meters

GB/T 17215.311-2008 history

• 2008 GB/T 17215.311-2008 Electricity metering equipment(a.c.).Particular requirements.Part 11:Electromechanical meter for active energy(class 0.5,1 and 2)
• 1994 GB/T 15283-1994 Class 0.5、1 and 2 alternating current watthour meters

GB/T 17215.311-2008 Electricity metering equipment(a.c.).Particular requirements.Part 11:Electromechanical meter for active energy(class 0.5,1 and 2) has been changed from GB/T 15283-1994 Class 0.5、1 and 2 alternating current watthour meters.

GB/T 17215.311-2008 -All Parts