GB 7260.4-2008 Uninterruptible power systems (UPS). Part 1-2: General and safety requirements for UPS used in restricted access locations (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB 7260.4-2008
Scope
This part of GB 7260 applies to electronic uninterruptible power supply equipment with energy storage devices in the DC link. This section cites relevant content of 4943-2001 and IEC 60950-1:2001. The main function of the uninterruptible power supply (UPS) covered by this standard is to ensure the continuity of the AC power output. The UPS also improves the quality of the power supply by maintaining the specified characteristics of the power supply. Notes on regional differences in relevant chapters of GB 4943-2001 and IEC 60950-1:2001 are also used. This section applies to mobile, stationary, fixed or embedded UPS intended to be installed in restricted access areas and used in low-voltage power distribution systems. This section specifies the requirements to ensure the safety of maintenance personnel. This section aims to ensure the safety of UPS installation, operation and maintenance according to the method specified by the manufacturer. The UPS may be a single UPS unit or an interconnected UPS system. This part excludes DC powered electronic ballasts (IEC 60347 and IEC 60925) and UPS based on rotating electrical machines. See GB 7260.1 for general regulations and safety requirements of UPS intended to be installed in areas accessible to operators, and see GB 7260.2 for requirements and definitions of electromagnetic compatibility (EMC).
GB 7260.4-2008 Referenced Document
GB 16895.2-2005 Electrical installations of buildings.Part 4-42:Protection for safety.Protection against thermal effects
GB 16895.21-2004 Electrical installations of buildings Part 4-41:Protection for safety-Protection against electric shock
GB 4208 Degrees of protection provided by enclosure(IP code)
GB 4943-2001 Safety of information technology equipment
GB/T 16935.1-1997 Insulation coordination for eguipment within low-voltage systems. Part 1: Principles, requirements and tests
GB/T 17045-2006 Protection against electric shock - Common aspects for installation and equipment
GB/T 4026-2004 Basic and safety principles for man-machine interface,marking and identifieation-ldentification of equipment terminals and of terminations of certain designated conductors,including general rules for an alphanumeric system
GB/T 5465.2 Graphical symbols for electrical equipment Part 2: Graphical symbols*, 2023-12-28 Update
GB/T 7260.3 Uninterruptible power systems(UPS) Part 3: Method of specifying the performance and test requirements
IEC 60950-1:2001 Information technology equipment - Safety - Part 1: General requirements
IEC 61000-2-2:2002 Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems
GB 7260.4-2008 history
2008GB 7260.4-2008 Uninterruptible power systems (UPS). Part 1-2: General and safety requirements for UPS used in restricted access locations