GB/T 8013.2-2007
Anodic oxide coatings and organic polymer coatings on aluminium and its alloys Part 2: Combined anodic oxide coating (English Version)

Standard No.

GB/T 8013.2-2007

Language

Chinese, Available in English version

Release Date

2007

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Status

Be replaced 2019-02

Replace By

GB/T 8013.2-2018

Latest

GB/T 8013.2-2018

Scope

This part specifies the terms, definitions, classifications, performance requirements, test methods and inspection rules of the effective surface of aluminum and aluminum alloy anodized composite films. This part applies to the anodized composite film obtained by coating organic polymer film on the surface of deformed aluminum and aluminum alloy anodized film for the main purpose of protection and decoration.

GB/T 8013.2-2007 Referenced Document

• GB/T 10125 Corrosion tests in artificial atmospheres—Salt spray tests*， 2021-08-20 Update
• GB/T 11186.2 Methods for measuring the colour of paint films--Part 2:Colour measurement
• GB/T 11186.3 Methods for measuring the colour of paint films--Part 3:Calculation of colour differences
• GB/T 12967.1 Test methods for anodic oxidation coatings and organic polymer coatings of aluminium and aluminium alloys―Part 1: Measurement of abrasion resistance*， 2020-06-02 Update
• GB/T 14952.3 Anodizing of aluminium and its alloys.Testing method for anodic oxide coating
• GB/T 16585 Rubber,vulcanized--Test method of resistance to artificial weathering (Fluorescent UV lamp)
• GB/T 1740 Determination of resistance to heat and humidity of paint films *， 2007-09-11 Update
• GB/T 1766 Paints and varnishes.Rating schemes of degradation of coats*， 2008-06-04 Update
• GB/T 1865 Paints and varnishes.Artificial weathering and exposure to artificial radiation.Exposure to filtered xenon-arc radiation*， 2009-06-02 Update
• GB/T 4957 Non-conductive coatings on non-magnetic basis metals--Measurement of coating thickness-Eddy current
• GB/T 629 Chemical reagent. Sodium hydroxide
• GB/T 6461 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests
• GB/T 6462 Metallic and oxide coatings-Measurement of coating thinckness-Microscopical method
• GB/T 6682 Water for analytical laboratory use.Specification and test methods*， 2008-05-15 Update
• GB/T 6739 Paints and varnishes—Determination of film hardness by pencil test*， 2022-12-30 Update
• GB/T 8013.1 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 1: Anodic oxide coatings*， 2018-05-14 Update
• GB/T 8014.1 Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle
• GB/T 9276 Methods of exposure to natural weathering of coating
• GB/T 9286 Paints and varnishes—Cross-cut test*， 2021-08-20 Update
• GB/T 9754 Paints and varnishes.Determination of specular gloss of non-metallic paint films at 20°,60°and 85°*， 2007-09-11 Update
• GB/T 9761 Paints and varnishes. Visual comparison of the colour of paints*， 2008-05-14 Update
• GB/T 9789 Metallic and other non-organic coatings.Sulfur dioxide test with general condensation of moisture*， 2008-06-19 Update
• JC/T 480 Quicklime powder intended to be used in construction

GB/T 8013.2-2007 history

• 2018 GB/T 8013.2-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys.Part 2:Combined coatings
• 2007 GB/T 8013.2-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys Part 2: Combined anodic oxide coating

GB/T 8013.2-2007 -All Parts