GB/T 31301.7-2020
Footwear manufacturing machines—Safety requirememts—Part 7: Milling and engraving machines (English Version)

Standard No.

GB/T 31301.7-2020

Language

Chinese, Available in English version

Release Date

2020

Published By

国家市场监督管理总局、中国国家标准化管理委员会

Latest

GB/T 31301.7-2020

Scope

This part of GB/T31301 specifies the relevant safety requirements for the definition, design, structure, transportation, installation, adjustment, operation cleaning and maintenance of milling machines and engraving machines. This section contains all major hazards associated with milling machines and engraving machines within the scope of this section arising from the intended use and foreseeable misuse of milling and engraving machines by operators. Hazardous states and hazardous events (see Appendix A) . This part is applicable to the milling machines and engraving machines used in the shoe industry to obtain shoe parts or shoe molds by cutting and removing material molding methods (see Appendix B for the schematic diagram of the models). This section does not apply to punching. Ma Xiao and chipping machines.

GB/T 31301.7-2020 Referenced Document

• GB 19436.3 Electrical safety of machinery.Electro-sensitive protective equipment.Part 3:Particular requirements for Active Opto-electronic.Protective Devices responsive to Diffuse Reflection(AOPDDR)
• GB 25285.1 Explosive atmospheres.Explosion prevention and protection.Part 1:Basic concepts and methodology
• GB/T 14048.5 Low-voltage switchgear and controlgear—Part 5-1: Control circuit devices and switching element—Electromechanical control circuit devices
• GB/T 15241.2 Ergonomic principles related to mental workload--Part 2: Design principles
• GB/T 15706 Safety of machinery.General principles for design.Risk assessment and risk reduction
• GB/T 16754 Safety of machinery—Emergency stop function—Principles for design*， 2021-05-21 Update
• GB/T 16855.1 Safety-related components of machinery safety control systems Part 1: General principles for design
• GB/T 17421.5 Test code for machine tools.Part 5:Determination of the noise emission
• GB/T 17454.1 Safety of machinery—Pressure-sensitive protective devices—Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
• GB/T 17454.2 Safety of machinery—Pressure-sensitive protective devices—Part 2: General principles for design and testing of pressure-sensitive edges pressure-sensitive bars
• GB/T 17888.1 Safety of machinery—Permanent means of access to machinery—Part 1: Choice of fixed means and general requirements of access*， 2020-11-19 Update
• GB/T 17888.2 Safety of machinery—Permanent means of access to machinery—Part 2: Working platforms and walkways*， 2020-11-19 Update
• GB/T 18209.1 Electrical safety of machinery.Indication,marking and actuation.Part 1:Requirements for visual,acoustic and tactile signals
• GB/T 18569.1 Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 1: Principles and specifications for machinery manufacturers*， 2020-06-02 Update
• GB/T 18569.2 Safety of machinery—Reduction of risks to health resulting from hazardous substances emitted by machinery—Part 2: Methodology leading to verification procedures*， 2020-06-02 Update
• GB/T 18717.1 Ergonomic design for the safety of machinery--Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery
• GB/T 18717.2 Ergonomic design for the safety of machinery--Part 2: Principles for determining the dimensions required for openings for access of parts of the body into machinery
• GB/T 19436.1 Electrical safety of machinery.Electro-sensitive protective equipment.Part 1:General requirements and tests
• GB/T 19670 Machinery safety prevents accidental start-up*， 2023-09-07 Update
• GB/T 19876 Safety of machinery—Positioning of safeguards with respect to the approach speeds of parts of the human body
• GB/T 20528.1 Ergonomic requirement for work with visual displays based on flat panels Part 1: Introduction
• GB/T 23821 Safety distance of machinery safety to prevent the upper and lower limbs from touching the danger zone*， 2022-11-08 Update
• GB/T 25078.1 Implementation recommendations for the design of acoustically low-noise machines and equipment Part 1: Planning
• GB/T 25078.2 Acoustics.Recommended practice for the design of low-noise machinery and equipment.Part 2:Intrduction to the physics of low noise design
• GB/T 28780 Safety of machinery.Integral lighting of machines
• GB/T 31301.5 Footwear machines.Safety requirements.Part 5:Splitting, trimming and cutting machines
• GB/T 31301.7 Footwear manufacturing machines—Safety requirememts—Part 7: Milling and engraving machines
• GB/T 3766 Hydraulic fluid power.General rules and safety requirements for systems and their components
• GB/T 5226.1 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements
• GB/T 7932 Pneumatic fluid power-General rules and safety requirements for systems and their components
• GB/T 8196 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards

GB/T 31301.7-2020 history

• 2020 GB/T 31301.7-2020 Footwear manufacturing machines—Safety requirememts—Part 7: Milling and engraving machines

GB/T 31301.7-2020 -All Parts