ASTM D3105-17
Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials

Standard No.

ASTM D3105-17

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D3105-17(2024)

Latest

ASTM D3105-17(2024)

Scope

1.1 This index is provided for reference to aid in the selection of procedures and test methods used in the evaluation of sheet and liquid roofing materials, as appropriate. Composition specifications and analytical methods in general, as well as tests on raw materials, are not included, the scope being limited to procedures used in the evaluation of the materials as received or as finished materials or coatings.

ASTM D3105-17 Referenced Document

• ASTM D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
• ASTM D1004 Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
• ASTM D1042 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
• ASTM D1149 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber
• ASTM D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
• ASTM D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
• ASTM D1239 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals
• ASTM D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
• ASTM D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing*， 2020-10-01 Update
• ASTM D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
• ASTM D1499 Standard Practice Filtered Open-Flame Carbon-Arc Type Exposures of Plastics
• ASTM D1640/D1640M Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings*， 2022-06-01 Update
• ASTM D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
• ASTM D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
• ASTM D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
• ASTM D1824 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
• ASTM D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method*， 2023-05-15 Update
• ASTM D2136 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
• ASTM D2137 Standard Test Methods for Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
• ASTM D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
• ASTM D2240 Standard Test Method for Properties of Rubber &8212; Durometer Hardness*， 2024-04-21 Update
• ASTM D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing*， 2024-04-21 Update
• ASTM D2290 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe*， 2019-08-01 Update
• ASTM D2291/D2291M Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites*， 2022-11-01 Update
• ASTM D2369 Standard Test Method for Volatile Content of Coatings
• ASTM D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes*， 2024-04-21 Update
• ASTM D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
• ASTM D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
• ASTM D3045 Standard Practice for Heat Aging of Plastics Without Load
• ASTM D3111 Standard Test Method for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test Method
• ASTM D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
• ASTM D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)
• ASTM D3746/D3746M Standard Test Method for Impact Resistance of Bituminous Roofing Systems*， 2022-05-01 Update
• ASTM D4073 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
• ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers8212;Tension
• ASTM D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate*， 2017-10-01 Update
• ASTM D430 Standard Test Methods for Rubber Deterioration-Dynamic Fatigue
• ASTM D471 Standard Test Method for Rubber Property-Effect of Liquids
• ASTM D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)*， 2021-01-01 Update
• ASTM D4799/D4799M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)*， 2023-02-01 Update
• ASTM D4977/D4977M Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion*， 2020-05-01 Update
• ASTM D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material*， 2018-07-01 Update
• ASTM D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material*， 2021-12-01 Update
• ASTM D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
• ASTM D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens*， 2022-11-01 Update
• ASTM D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens*， 2022-11-01 Update
• ASTM D5636/D5636M Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials*， 2022-11-01 Update
• ASTM D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes*， 2022-11-01 Update
• ASTM D570 Standard Test Method for Water Absorption of Plastics*， 2018-08-01 Update
• ASTM D573 Standard Test Method for Rubber-Deterioration in an Air Oven
• ASTM D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)*， 2021-01-01 Update
• ASTM D5869 Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
• ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers*， 2024-04-21 Update
• ASTM D638 Standard Test Method for Tensile Properties of Plastics
• ASTM D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material*， 2022-11-01 Update
• ASTM D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material*， 2021-12-01 Update
• ASTM D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30176C and 30176C With a Vitreous Silica Dilatometer
• ASTM D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems*， 2024-04-21 Update
• ASTM D7379/D7379M Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive*， 2024-04-21 Update
• ASTM D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
• ASTM D750 Standard Test Method for Rubber Deterioration in Carbon-Arc Weathering Apparatus
• ASTM D751 Standard Test Methods for Coated Fabrics
• ASTM D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement*， 2018-11-01 Update
• ASTM D816 Standard Test Methods for Rubber Cements
• ASTM D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
• ASTM D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
• ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
• ASTM D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
• ASTM E108 Standard Methods of Fire Tests Of Roof Coverings
• ASTM E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
• ASTM E96/E96M Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials*， 2024-03-01 Update
• ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Materials*， 2023-01-01 Update
• ASTM G155 Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials*， 2024-04-21 Update
• ASTM G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi

ASTM D3105-17 history

• 2024 ASTM D3105-17(2024) Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
• 2017 ASTM D3105-17 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
• 2008 ASTM D3105-08 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
• 1999 ASTM D3105-99 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials