ASTM D5147/D5147M-18
Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

Standard No.

ASTM D5147/D5147M-18

Release Date

2018

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D5147/D5147M-18

Scope

1.1 These test methods cover procedures for sampling and testing prefabricated, reinforced, polymer-modified bituminous sheet materials designed for singleor multiple-ply application in roofing and waterproofing membranes. These products may use various surfacing materials on one side. 1.2 These test methods cover a number of different products. Not all tests are required for every product. Only those called out in the Product Standard are required. 1.3 These test methods appear in the following order: Section Sampling 4 Conditioning 5 Thickness 6 Load Strain Properties 7 Tear Strength 8 Moisture Content 9 Water Absorption 10 Dimensional Stability 11 Low-Temperature Flexibility 12 Heat Conditioning 13 Accelerated Weathering 14 Granule Embedment 15 Compound Stability 16 Coating Thickness 17 Low Temperature Unrolling 18 Precision and Bias 19 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D5147/D5147M-18 Referenced Document

• ASTM D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
• ASTM D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing*， 2020-10-01 Update
• ASTM D4073 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
• ASTM D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)*， 2021-01-01 Update
• ASTM D4977/D4977M Standard Test Method for Granule Adhesion to Mineral-Surfaced Roofing by Abrasion*， 2020-05-01 Update
• ASTM D5636/D5636M Standard Test Method for Low-Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials*， 2022-11-01 Update
• ASTM D5869/D5869M Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials*， 2023-05-01 Update
• ASTM D6162/D6162M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements*， 2021-12-01 Update
• ASTM D6163/D6163M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements*， 2021-12-01 Update
• ASTM D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements*， 2021-12-01 Update
• ASTM D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements*， 2023-02-01 Update
• ASTM D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements*， 2021-12-01 Update
• ASTM D6298/D6298M Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface*， 2023-02-01 Update
• ASTM D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements*， 2023-02-01 Update
• ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
• ASTM E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
• ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

ASTM D5147/D5147M-18 history

• 2018 ASTM D5147/D5147M-18 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2014 ASTM D5147/D5147M-14 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2011 ASTM D5147/D5147M-11a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2011 ASTM D5147/D5147M-11 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2007 ASTM D5147-07b Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2007 ASTM D5147-07a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2007 ASTM D5147-07 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2006 ASTM D5147-06 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2005 ASTM D5147-05 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2002 ASTM D5147-02ae1 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2002 ASTM D5147-02a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2002 ASTM D5147-02 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2001 ASTM D5147-01a Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 2001 ASTM D5147-01 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
• 1997 ASTM D5147-97 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material