This standard specifies the terms and definitions, product classification and naming, technical requirements, test methods and inspection rules of non-directional self-ballasted LED lamps for general lighting. This standard applies to non-directional self-ballasted LED lamps integrated with stable ignition components for general lighting in households and similar occasions. The scope of application is as follows: -- rated power not greater than 60 W; -- rated voltage AC 220 V, frequency 50 Hz; -- use screw-on lamp caps that comply with GB/T 1406.1 or bayonet-type lamp caps that comply with GB/T 1406.5. All lamps that meet the requirements of this standard should be able to start and work normally when the rated power supply voltage is 92%~106% or the nominal operating voltage range, and the ambient temperature is between -20 ℃ and 45 ℃.
GB/T 24908-2014 Referenced Document
GB 17625.1 Electromagnetic compatibility—Limits—Part 1: Limits for harmonic current emissions (equipment input current ≤ 16A per phase)*, 2022-12-29 Update
GB 17743 Limits and methods of measurement of radio disturbance characteristks of electrical lighting and similar equipment
GB 24906 Self-ballasted LED lamps for general lighting services >50 V-Safety specifications
GB/T 10681 Tungsten filament lamps for domestic and similar general lighting purposes.Performance requirements
GB/T 1406.1 Types and dimensions of lamp caps.Part 1:Screw caps
GB/T 1406.5 Types and dimensions of lamp caps.Part5:Bayonet caps
GB/T 1483.1 Gauges for lamp caps and holders.Part 1:Gauges for screw caps and holders
GB/T 1483.5 Gauges for caps and lampholders.Part 5:Gauges for bayonet caps and lampholders
GB/T 18595 Equipment for general lighting purposes.EMC immunity requirements*, 2014-12-22 Update
GB/T 20145 Photobiological safety of lamps and lamp systems
GB/T 24824 Measurement methods of LED modules for general lighting
GB/T 24826 General lighting-Light emitting diode(LED) products and related equipment.Terms and definitions*, 2016-04-25 Update
GB/T 2828.1 Inspection procedure by count sampling part 1: Lot by lot inspection sampling plan retrieved by acceptance quality limit (AQL)
GB/T 2829 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 31112 Classification of non-directional self-ballasted LED-lamps for general lighting services
GB/T 7249 Maximum lamp outlines for incandescent lamps*, 2016-04-25 Update
GB/T 24908-2014 history
2014GB/T 24908-2014 Non-directional self-ballasted LED-lamps for general lighting services.Performance requirements
2010GB/T 24908-2010 Self-ballasted LED lamps for general lighting services-Performance requirements