This standard specifies LED lamps (white-ballasted LED lamps) integrating stable ignition components for general lighting in households and similar applications. This standard specifies the safety and interchangeability requirements for this kind of lamp, as well as the test method and the conditions for checking its eligibility. This standard applies to the following ranges: - Rated power below 60 W; - Rated voltage greater than 50 V and less than or equal to 250 V; - Lamp caps meeting the requirements in Table 1. The requirements of this standard relate only to type testing. The inspection methods for all products and batch products will be defined in Appendix C of GB 24819-2009.
GB 24906-2010 Referenced Document
GB 1312 Lampholders for tubular fluorescent lamps and starterholders
GB 14196.1 Incandescent lamps.Safety specifications.Part 1:Tungsten filament lamps for domestic and similar general lighting purposes
GB 19510.1 Lamp controlgear-Part 1:General and safety requirements
GB 24819 LED modules for general lighting.Safety specifications
GB 7000.1 Luminaires - Part 1: General requirements and tests*, 2017-01-01 Update
GB/T 24392 Standard method of measurement of lamp cap temperature rise
GB/T 5169.10-2006 Fire hazard testing for electric and electronic products Part 10: Glow/hot-wire based test methods Glow-wire apparatus and common test procedure
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products.Part 11:Glowing/hot-wire based test methods.Glow-wire flammability test method for end-products
GB/T 5169.12-2006 Fire hazard testing for electric and electronic products Part 12: Glowing/hot-wire based test methods Glow-wire flammability test method for materials
GB/T 5169.13-2006 Fire hazard testing for electric and electronic products.Part 13:Glowing/hot-wire based test methods.Glow-wire ignitability test method for materials
IEC 60061-1 Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps
IEC 60061-3 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
IEC 60529:1989 Degrees of protection provided by enclosures (IP code)
IEC 62471 Photobiological safety of lamps and lamp systems
IEC TS 62504 General lighting - LEDs and LED modules - Terms and definitions*, 2011-03-01 Update
ISO 4046-4:2002 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products
GB 24906-2010 history
2023GB/T 24906-2023 Safety specifications for self-ballasted LED lamps above 50V for general lighting
2010GB 24906-2010 Self-ballasted LED lamps for general lighting services >50 V-Safety specifications
GB 24906-2010 Self-ballasted LED lamps for general lighting services >50 V-Safety specifications was changed to GB/T 24906-2023 Safety specifications for self-ballasted LED lamps above 50V for general lighting.