General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB 30747-2014
Scope
This standard specifies the terms and definitions, the list of major hazards, the safety requirements and/or protective measures, the verification and use information of the safety requirements and/or protective measures in the safety requirements of the tire shaping vulcanizing machine (hereinafter referred to as the vulcanizing machine). This standard does not include the safety requirements related to the design of the feeding system, unloading system, related auxiliary equipment (such as conveying equipment, etc.) and the exhaust system, and the danger caused by the fall of the mold set or mold parts. This standard is applicable to the crank-link type vulcanizing press (referred to as mechanical vulcanizing press) and hydraulic vulcanizing press for vulcanizing pneumatic tire casings. This standard does not apply to vulcanizers produced before the implementation date of this standard.
GB 16754 Safety of machinery.Emergency stop.Principles for design
GB 17888.2 Safety of machinery.Permanent means of access to machinery.Part 2:Working platforms and walkways
GB 17888.3 Safety of machinery.Permanent means of access to machinery.Part 3:Stairs,stepladders and guard-rails
GB 17888.4 Safety of machinery.Permanent means of access to machinery.Part 4:Fixed ladders
GB 19436.3 Electrical safety of machinery.Electro-sensitive protective equipment.Part 3:Particular requirements for Active Opto-electronic.Protective Devices responsive to Diffuse Reflection(AOPDDR)
GB 23821-2009 Safety of machinery-Safety distances to prevent hazard zones being reached by upper and lower limbs
GB 2894-2008 Safety signs and guideline for the use
GB 5226.1-2008 Electrical safety of machinery - Electrical equipment for machinery - Part 1: General specifications
GB/T 15706 Safety of machinery.General principles for design.Risk assessment and risk reduction
GB/T 16855.1 Safety-related components of machinery safety control systems Part 1: General principles for design*, 2019-07-01 Update
GB/T 17454.2 Safety of machinery—Pressure-sensitive protective devices—Part 2: General principles for design and testing of pressure-sensitive edges pressure-sensitive bars*, 2017-05-12 Update
GB/T 18153 Safety of machinery-Temperatures of touchable surfaces-Ergonomics data to establish temperature limit values for hot surfaces
GB/T 18831 Safety of machinery—Interlocking devices associated with guards—Principles for design and selection*, 2017-12-29 Update
GB/T 19436.1 Electrical safety of machinery.Electro-sensitive protective equipment.Part 1:General requirements and tests
GB/T 19876 Safety of machinery—Positioning of safeguards with respect to the approach speeds of parts of the human body
GB/T 3766 Hydraulic fluid power.General rules and safety requirements for systems and their components*, 2015-12-31 Update