JG/T 158-2013
Products for external thermal insulation systems based on mineral binder and expanded polystyrene granule plaster (English Version)

Standard No.

JG/T 158-2013

Language

Chinese, Available in English version

Release Date

2013

Published By

Professional Standard - Construction Industry

Latest

JG/T 158-2013

Replace

JG/T 158-2004

Scope

This standard specifies the terms and definitions, classification, general requirements, requirements, test methods, inspection rules, product certificates and instructions for use of rubber powder polystyrene particle exterior wall insulation system materials, as well as the marking, packaging, transportation and Storage. This standard applies to products using rubber powder polystyrene particle exterior wall insulation systems for civil buildings.

JG/T 158-2013 Referenced Document

• GB 8624 Classification for burning behavior of building materials and products
• GB/T 10294 Thermal insulation.Determination of steady-state thermal resistance and related properties.Guarded hot plate apparatus
• GB/T 10295 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
• GB/T 10299 Test method for hydrophobic nature of thermal insulation
• GB/T 10801.1 Moulded polystyrene foam for thermal insulation（EPS）*， 2021-08-20 Update
• GB/T 10801.2 Rigid extruded polystyrene foam board for thermal insulation(XPS)*， 2018-12-28 Update
• GB/T 16172 Test method for heat release rate of building materials
• GB/T 16777-2008 Test methods for building waterproofing coatings
• GB/T 17146-1997 Test methods for water vapour transmission of building materials
• GB/T 308 Rolling bearings--Steel balls
• GB/T 3186 Paints, varnishes and raw materials for paints and varnishes. Sampling
• GB/T 3810.1 Test methods of ceramic tiles.Part 1:Sampling and basis for acceptance*， 2016-04-25 Update
• GB/T 3810.12 Test methods of ceramic tiles.Part 12: Determination of frost resistance*， 2016-04-25 Update
• GB/T 3810.2 Test methods of ceramic tiles.Part 2: Determination of dimensions and surface quality*， 2016-04-25 Update
• GB/T 3810.3 Test method of ceramic tiles.Part 3:Determination of water absorption, apparent porosity,apparent relative density and bulk density*， 2016-04-25 Update
• GB/T 4100 Ceramic tiles*， 2015-05-15 Update
• GB/T 5486-2008 Test methods for inorganic rigid thermal insulation
• GB/T 7689.5-2001 Reinforcements--Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre
• GB/T 8625 Test method of difficult-flammability for building materials
• GB/T 8626 Test method of flammability for building materials
• GB/T 9914.3 The method for reinforcement products.Part 3:Determination of mass per unit area*， 2013-11-27 Update

JG/T 158-2013 history

• 2013 JG/T 158-2013 Products for external thermal insulation systems based on mineral binder and expanded polystyrene granule plaster
• 2004 JG/T 158-2004 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate