This standard specifies the method for determining the steady-state heat transfer properties of a plate event using a heat flow meter device and the calculation of heat transfer properties. This method is an indirect or relative method obtained by comparing the thermal resistance of the tested piece with the standard test piece. According to the report of the test method of this standard, the thermal resistance of the test piece should be greater than 0.1㎡•K/W, and the thickness should meet the requirements of 1.7.2. If the test piece meets the requirements of 1.8.1, the results shall be expressed as the thermal conductivity and thermal resistance of the test piece. If the test piece meets the requirements of 1.8.2, the result shall be expressed as the average thermal conductivity of the test piece. If the test piece meets the requirements of 1.8.3, the result can be expressed as the thermal conductivity or apparent thermal conductivity of the material.
GB/T 10295-2008 Referenced Document
ISO 7345:1987 Thermal insulation; Physical quantities and definitions
ISO 8302:1991 Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus
ISO 9229:1991 Thermal insulation; materials, products and systems; vocabulary
ISO 9251:1987 Thermal insulation; Heat transfer conditions and properties of materials; Vocabulary Bilingual edition
ISO 9288:1989 Thermal insulation; heat transfer by radiation; physical quantities and definitions
ISO 9346:1987 Thermal insulation - Mass transfer - Physical quantities and definitio
GB/T 10295-2008 history
2008GB/T 10295-2008 Thermal insulation.Determination of steady-state thermal resistance and related properties.Heat flow meter apparatus
1988GB/T 10295-1988 Thermal insulation--Determination of steady-state thermal resistance and related properties--Heat flow meter apparatus