This standard specifies technical principles such as the technical route, process design, environmental protection and evaluation of the definition, disposal, recovery and utilization of iron-containing dust and sludge in iron and steel enterprises. This standard is applicable to the recycling and utilization of dust and sludge produced in iron and steel enterprises in the process of raw material preparation, sintering, pelletizing, ironmaking, steelmaking and steel rolling, excluding metallurgical auxiliary material dust and sludge, steel rolling oily sludge and special ore processing Recycling and utilization of dust and sludge. The recycling and utilization of iron-containing dust and sludge in other industries can refer to this standard.
GB/T 28292-2012 Referenced Document
GB 12348 Emission standard for industrial enterprises noise at boundary
GB 13456 Discharge standard of water pollutants for iron and steel industry*, 2012-06-27 Update
GB 16297 Comprehensive emission standard of air pollutants
GB 18597 Standard for pollution control on hazardous waste storage*, 2023-01-20 Update
GB 18598 Hazardous waste landfill pollution control standard*, 2019-09-30 Update
GB 9078 Emission standard of air pollutants for industrial kiln and furnace
GB/T 16597 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods*, 2019-06-04 Update
GB/T 2001 Coke.Determination of proximate analysis*, 2013-12-17 Update
GB/T 2007.1 General rules for the sampling and sample preparation of minerals in bulk--Sampling by manual method
GB/T 2007.2 General rules for the sampling and sample preparation of minerals in bulk--Manual method of sample preparation
GB/T 2467 Pyrites and concentrate. Determination of lead content. Flame atomic absorption spectrometric and EDTA volumetric methods
GB/T 476 Determination of carbon and hydrogen in coal
GB/T 6730.42 Iron ores—Determination of lead content—Dithizone spectrophotometric method*, 2017-09-07 Update
GB/T 6730.46 Iron ores Determination of arsenic content Arseno-molybdenum blue spectrophotometric method after the distillation separation
GB/T 6730.54 Iron ores-Determination of lead content-Flame atomic absorption spectrometric method
GB/T 6730.61 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method*, 2022-10-14 Update
GB/T 6730.62 Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 6730.65 Iron ores.Determination of total iron content.Titanium(Ⅲ)chloride reduction potassium dichromate titration methods(routine methods)
GB/T 6730.66 Iron ores—Determination of total iron content—Automatic potentiometrictitration method
GB/T 6730.67 Iron ores-Determination of arsenic content-Hydride generation atomic absorption spectrometric method
GB/T 6730.68 Iron ores.Determination of loss on ignition.Gravimetric method
GB/T 8151.1 Methods for chemical analysis of zinc concentrates.Part 1:Determination of zinc content.Precipitate separation-Na<下标2>EDTA titrimetric method and extractive separatioh-Na<下标2> EDTA titrimetric method*, 2012-12-31 Update
GB/T 28292-2012 history
2013GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method
2012GB/T 28292-2012 The technical specification for recycling and utilization of Fe-bearing dusts and sludges in iron and steel industry
GB/T 28292-2012 The technical specification for recycling and utilization of Fe-bearing dusts and sludges in iron and steel industry was changed to GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method.