GB/T 29513-2013
Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method (English Version)
- Standard No.
- GB/T 29513-2013
- Language
- Chinese, Available in English version
- Release Date
- 2013
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Status
- Latest
- GB/T 29513-2013
- Replace By
- ABNT NBR 13487-2012
- Replace
- GB/T 28292-2012
- Scope
- This standard specifies the principle, reagents and materials, instruments and equipment, preparation of samples and glass samples, X-ray fluorescence spectrometry analysis, test report, precision, etc. for the determination of components in iron-containing dust by X-ray fluorescence spectrometry. This standard is applicable to the nine chemical components of total iron, silicon dioxide, calcium oxide, magnesium oxide, aluminum oxide, titanium dioxide, manganese oxide, phosphorus pentoxide and zinc oxide in iron-making and steel-making dust sludge. The ray fluorescence spectrum was measured at the same time, and the measurement range is listed in Table 1.
GB/T 29513-2013 Referenced Document
- GB/T 16597 Analytical methods of metallurgical products—General rule for X-ray fluorescence spectrometric methods*， 2019-06-04 Update
- GB/T 2007.2 General rules for the sampling and sample preparation of minerals in bulk--Manual method of sample preparation
- GB/T 6379.2 Accuracy(trueness and precision)of measurement methods and results-Part 2:Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 6730.68 Iron ores.Determination of loss on ignition.Gravimetric method
- GB/T 8170 Rules of rounding off for numerical values & expression and judgement of limiting values
- JJG 810 Verification Regulation for Wavelength Dispersive X-Ray Fluorescence Spectrometers
GB/T 29513-2013 history
- 2013 GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method
- 2012 GB/T 28292-2012 The technical specification for recycling and utilization of Fe-bearing dusts and sludges in iron and steel industry
GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method has been changed from GB/T 28292-2012 The technical specification for recycling and utilization of Fe-bearing dusts and sludges in iron and steel industry.
GB/T 29513-2013 Chemical analysis of ferric-containing dust and sludge by XRF.Fused cast bead method was changed to ABNT NBR 13487-2012 Optical fiber graded-index multimode type - Specification.
