GB/T 28412-2012
General specification of superalloy investment cast airfoils (English Version)

Standard No.

GB/T 28412-2012

Language

Chinese, Available in English version

Release Date

2012

Published By

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China

Latest

GB/T 28412-2012

Scope

1.1 This standard specifies the technical requirements, test methods, inspection rules and delivery conditions for the delivery of high-temperature alloy precision casting blade products. 1.2 This standard is applicable to precision casting turbine working blades and precision casting turbine guide blades for aero-engines, ships and ground gas turbines produced by ordinary precision casting, directional solidification casting and single crystal casting. Other types of cast blades can be used as reference. 1.3 When the provisions in the contract agreement or special technical documents are inconsistent with the provisions in this standard, the contract agreement or special technical documents shall prevail.

GB/T 28412-2012 Referenced Document

• GB/T 14992 Classification and designation for superalloys and high temperature intermetallic materials
• GB/T 14999.7 Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
• GB/T 20066 Steel and iron.Sampling and preparation of samples for the determination of chemical composition
• GB/T 20127.1-2006 Steel and alloy - Determination of trace element contents - Part 1: Determination of silver content by graphite furnace atomic absorption spectrometric method
• GB/T 20127.10-2006 Steel and alloy.Determination of trace element contents.Part 10: Determination of selenium content by hydride generation-atomic fluorescence spectrometric method
• GB/T 20127.11-2006 Steel and alloy - Determination of trace element contents - Part 11: Determination of indium and thallium contents by inductively coupled plasma-mass spectrometric method
• GB/T 20127.12-2006 Steel and alloy.Determiantion of trace element contents.Part 12:Determination of zinc content by flame atomic absorption spectrometric method
• GB/T 20127.13-2006 Steel and alloy - Determination of trace element contents - Part 13: Determination of tin content by iodide extraction-phenylfluorone photometric method
• GB/T 20127.2-2006 Steel and alloy - Determination of trace element contents - Part 2: Determination of arsenic content by hydride generation-atomic fluorescence spectrometric method
• GB/T 20127.3-2006 Steel and alloy - Determination of trace element contents - Part 3: Determination of calcium, magnesium, barium content by inductively coupled plasma atomic emission spectrometric method
• GB/T 20127.4-2006 Steel and alloy.Determination of trace element contents.Part 4:Determination of copper content by graphite furnace atomic absorption spectrometric method
• GB/T 20127.5-2006 Steel and alloy - Determination of trace element contents - Part 5: Determination of gallium content by extraction separation-rhodamine B photometric method
• GB/T 20127.6-2006 Steel and alloy - Determination of trace element contents - Part 6: Determination of germanium content by gallic acid oscillopolarographic method
• GB/T 20127.7-2006 Steel and alloy - Determination of trace element contents - Part 7: Determination of lead content by oscillopolarographic method
• GB/T 20127.8-2006 Steel and alloy - Determination of trace element contents - Part 8: Determination of antimony content by hydride generation-atomic fluorescence spectrometric method
• GB/T 20127.9-2006 Steel and alloy - Determination of trace element contents - Part 9: Determination of scandium content by inductively coupled plasma atomic emission spectrometric method
• GB/T 2039 Metallic materials.Uniaxial creep testing method in tension
• GB/T 223.1 Determination of carbon content in iron,steel and alloy
• GB/T 223.10 Methods for chemical analysis of iron,steel and alloy The cupferron separation-chrome azurol S photometric method for the determination of aluminium content
• GB/T 223.11 Determination of chromium content in iron, steel and alloy by visual titration or potentiometric titration
• GB/T 223.12 Methods for chemical analysis of iron,steel and alloy--The sodium carbonate separation-diphenyl carbazide photometric method for the determination of chromium content
• GB/T 223.13 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
• GB/T 223.14 Methods for chemical analysis of iron,steel and alloy The N-benzoy-N-phenylhydroxylamine extraction photometric method for the determination of vanadium content
• GB/T 223.15 Chemical analysis of iron,steel and alloy--The determination of titanium by gravimetric method
• GB/T 223.16 Methods for chemical analysis of iron,steel and alloy--The chromotropic acid photometric method for the determination of titanium content
• GB/T 223.17 Methods for chemical analysis of iron,steel and alloy--The diantipyrylmethane photometric method for the determination of titanium content
• GB/T 223.18 Methods for chemical analysis of iron steel and alloy.The sodium thiosulfate separation iodimetric method for the determination of cupper content
• GB/T 223.19 Methods for chemical analysis of iron,steel and alloy--The neocuproine-chloroform extraction photometric method for the determination of copper content
• GB/T 223.20 Methods for chemical analysis of iron steel and alloy.The Potentiometric titration method for the determination of cobalt content
• GB/T 223.21 Methods for chemical analysis of iron steel and alloy.The 5-CL-PADAB spectrophotometric method for the determination of cobalt content
• GB/T 223.22 Methods for chemical analysis of iron ,steel and alloy.The nitroso-R-salt spectrophotometric method for the determination of cobalt content
• GB/T 223.23 Iron,,steel and alloy.Determination of nickel content.The dimethylglyoxime spectrophotometric method
• GB/T 223.24 Methods for chemical analysis of iron, steel and alloy.The extraction seperation--The dimethylglyoxime spectrophotometric method for the determination of nickel content
• GB/T 223.25 Methods for chemical analysis of iron, steel and alloy.The dimethylglyoxime gravimetric method for the determination of nickel content
• GB/T 223.26 Iron,steel and alloy.Determination of molybdenum content.The thiocyanate spectrophotometric method
• GB/T 223.27 Methods for chemical analysis of iron, steel and alloy.The thiocyanate-butyl acetate extraction spectrophotometric method for the determination of molybdenum content
• GB/T 223.28 Methods for chemical analysis of iron,steel and alloy--The α-benzoinoxime gravimetric method for the determination of molybdenum content
• GB/T 223.29 Iron,steel and alloy.Determination of lead content.Carrier precipitation-xylenol orange spectrophotometric method
• GB/T 223.3 Methods for chemical analysis of iron, steel and alloy--The diantipyrylmethane phosphomolybdate gravimetric method for the determination of phosphorus content
• GB/T 223.30 Methods for chemical analysis of iron,steel and alloy. The arsenazo Ⅲ spectrophotometric method for the determination of zirconium content after separation by p-bromomandelic acid
• GB/T 223.31 Iron,steel and alloy.Determination of arsenic content.Distillation-molybdenum blue spectrophotometric method
• GB/T 223.32 Methods for chemical analysis of iron,steel and alloy. The hypophosphite reduction-iodimetric method for the determination of arsenic content
• GB/T 223.33 Methods for chemical analysis of iron,steel and alloy. The chlorophosphonazo mA photometric method for the determination of cerium content after extraction separation
• GB/T 223.34 Methods for chemical analysis of iron,steel and alloy-The determination of hydrochloric acid-insoluble content of iron powders
• GB/T 223.35 Methods for chemical analysis of iron,steel and alloy--The pulse heating inert gas fusion-coulometric titration method for the determination of oxygen content
• GB/T 223.36 Methods for chemical analysis of iron, steel and alloy. The neutral titration method for the determinaion of nitrogen content after distillation separation
• GB/T 223.37 Iron, steel and alloy—Determination of nitrogen content—Indophenol blue spectrophotometric method after distillation separation*， 2020-06-02 Update
• GB/T 223.38 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-gravimetric method for the determination of niobium content
• GB/T 223.39 Methods for chemical analysis iron,steel and alloy. The sulphochlorophenol S photometric method for the determination of niobium content
• GB/T 223.4 Alloyed steel.Determination of manganese content.Potentiometric or visual titration method
• GB/T 223.40 Iron, steel and alloy Determination of niobium content by the sulphochlorophenol S spectrophotometric method
• GB/T 223.41 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-pyrogallol photometric method for the determination of tantalum content
• GB/T 223.42 Methods for chemical analysis of iron,steel and alloy--The anion-exchange separation-bromopyrogallol red photometric method for the determination of tantalum content
• GB/T 223.43 Iron,steel and alloy.Determination of tungsten content.Gravimetric method and spectrophotometric method
• GB/T 223.45 Methods for chemical analysis of iron,steel and alloy. The cupral Separation-xylidyl blue Ⅱphotometric method for the determination of magnesium content
• GB/T 223.46 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrometric method for the determination of magnesium content
• GB/T 223.47 Methods for chemical analysis of iron,steel and alloy. The carrier precipitation-molybdenum blue potometric method for the determination of antimony content
• GB/T 223.48 Methods for chemical analysis of iron,steel and alloy--The semixylenol orange photometric method for the determination of bismuth content
• GB/T 223.49 Methods for chemical analysis of iron,steel and alloy. Extraction separation-chlorophosphonazo mA spectrophotometric method for the determination of the total rare tarth content
• GB/T 223.5 Steel and iron.Determination of acid-soluble silicon and total silicon content.Reduced molybdosilicate spectrophotometric method
• GB/T 223.50 Methods for chemical analysis of iron, steel and alloy. The phenylfluorone-CTMAB direct photometric method for the determination of tin content
• GB/T 223.51 Methods for chemical analysis of iron,steel and alloy--The 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol photometric method for the determination of zinc content
• GB/T 223.52 Methods for chemical analysis of iron,steel and alloy--The hydroxylamine hydrochloride-iodometric method for the determination of selenium content
• GB/T 223.53 Methods for chemical analysis of iron,steel and alloy--The flame atomic absorption spectrophotometric method for the determination of copper content
• GB/T 223.54 Iron, steel and alloy—Determination of nickel content—Flame atomic absorption spectrometric method*， 2022-07-11 Update
• GB/T 223.55 Iron, steel and alloy. Determination of tellurium content. Oscillo-polarographic method
• GB/T 223.56 Methods for chemical analysis of iron,steel and alloy--The sulfhydryl cotton fiber separation-oscillopolarographic method for the determination of tellurium content
• GB/T 223.57 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of cadmium content
• GB/T 223.58 Methods for chemical analysis of iron,steel and alloy--The sodium arsenite-sodium nitrite titrimetric method for the determination of manganese content
• GB/T 223.59 Iron,steel and alloy.Determination of phosphorus content.Bismuth phosphomolybdate blue spectrophotometic method and antimony phosphomolybdate blue spectruophotometric method
• GB/T 223.6 Methods for chemical analysis of iron,steel and alloy. The neutralization titrimetric method for the determination of boron content
• GB/T 223.60 Methods for chemical analysis of iron, steel and alloy--The perchloric acid dehydration gravimetric method for the determination of silicon content
• GB/T 223.61 Methods for chemical analysis of iron, steel and alloy--The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
• GB/T 223.62 Methods for chemical analysis of iron, steel and alloy--The butyl acetate extraction photometric method for the determination of phosphorus content
• GB/T 223.63 Iron, steel and alloy—Determination of manganese content—Sodium (potassium) periodate spectrophotometric method*， 2022-07-11 Update
• GB/T 223.64 Iron,steel and alloy.Determination of manganese content.Flame atomic absorption spectrometric method
• GB/T 223.65 Steel, iron and alloy.Determination of cobalt content.Flame atomic absorption spectrometric method*， 2012-12-31 Update
• GB/T 223.66 Methods for chemical analysis of iron,steel and alloy--The thiocyanate-chlorpromazine hydrochloride-chloroform extraction photometric method for the determination of tungsten content
• GB/T 223.67 Iron,steel and alloy.Determination of sulfur content.Methylene blue spectrophotometric method
• GB/T 223.68 Methods for chemical analysis of iron, steel and alloy. The potassium iodate titration method after combustion in the pipe furnace for the determination of sulfur content
• GB/T 223.69 Iron,steel and alloy.Determination of carbon contents.Gas-volumetric method after combustion in the pipe furnace
• GB/T 223.7 Iron powder--Determination of iron content--Potassium dichromate titration method
• GB/T 223.70 Iron,steel and alloy.Determination of iron contents. o-Phenanthroline spectrophotometric method
• GB/T 223.71 Methods for chemical analysis of iron, steel and alloy. The gravimetric method after combustion in the pipe furnace for the determination of carbon content
• GB/T 223.72 Iron,steel and alloy.Determination of sulfur content.Gravimetric method
• GB/T 223.73 Iron,steel and alloy.Determination of iron contents. Titanium trichloride-potassium dichromate titration method
• GB/T 223.74 Methods for chemical analysis of iron, steel and alloy. The combustion gravimetric/gas-volumetric method for the determination of combined carbon content
• GB/T 223.75 Iron,steel and alloy.Determination of boron content. Methanol distillation-curcumin photometric method
• GB/T 223.76 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of vanadium content
• GB/T 223.77 Methods for chemical analysis iron,steel and alloy.The flame atomic absorption spertrometric method for the determination of calcium content
• GB/T 223.78 Methods for chemical analysis of iron,steel and alloy-Curcumin spectrophotometric method for the determination of boron content
• GB/T 223.79 Iron and steel-Determination of multi-element contents-X-ray fluorescence spectrometry (Routine method)
• GB/T 223.8 Methods for chemical analysis of iron,steel and alloy The sodium fluoride separation-EDTA titration method for the determination of aluminium content
• GB/T 223.80 Iron,steel and alloy-Determination of trace bismuth and arsenic contents- Hydride generation-atomic fluorescence spectrometric method
• GB/T 223.81 Iron,steel and alloy-Determination of total aluminum and total aluminum and total boron contents-Microwave digestion-inductively coupled plasma mass spectrometric method
• GB/T 223.82 Steel and iron.Determination of hydrogen content.Thermal conductivity/infrared method after fusion under inert gas*， 2018-05-14 Update
• GB/T 223.83 Steel and iron.Determination of high sulfur content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.84 Steel and iron.Determination of titanium content.Diantipyrylmethane spectrophotometric method
• GB/T 223.85 Steel and iron.Determination of sulfur content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.86 Steel and iron.Determination of total carbon content.Infrared absorption method after combustion in an induction furnace
• GB/T 223.87 Iron, steel and alloy.Determination of calcium and magnesium.Inductively coupled plasma mass spectrometric method*， 2018-05-14 Update
• GB/T 223.88 Iron, steel and alloy—Determination of calcium and magnesium contents—Inductively coupled plasma atomic emission spectrometric method*， 2019-06-04 Update
• GB/T 223.89 Iron, steel and alloy—Determination of tellurium content—Hydride generation-atomic fluorescence spectrometric method*， 2019-08-30 Update
• GB/T 223.9 Iron,steel and alloy.Determination of aluminium content.Chrome azurol S photometric method
• GB/T 223.90 Iron, steel and alloy—Determination of silicon content—Inductively coupled plasma atomic emission spectrometric method*， 2021-08-20 Update
• GB/T 223.91 Iron, steel and alloy—Determination of copper—2,2’-Biquinoline spectrophotometric method*， 2021-08-20 Update
• GB/T 228.1 Metallic materials—Tensile testing—Part 1: Method of test at room temperature*， 2021-12-31 Update
• GB/T 25932 General specification of superalloy master alloys for castings
• GB/T 4338 Metallic materials.Tensile testing at elevated temperature
• GJB 509 Heat treatment process quality control specifications
• GJB 905 Quality control for investment casting process.
• HB 6103 Dimensional tolerances and machining allowances of castings
• HB 6573 Standard Reference Radiographic Films for Investment Steel Castings (Films Not Provided)
• HB 6742 Determination of Crystal Orientation of Single Crystal Blades by X-ray Backblow Laue Photography
• HB/Z 131-1988 Technical requirements for selecting raw materials for cast superalloys
• HB/Z 60 Radiographic inspection
• HB/Z 61 penetration testing
• YB/T 081 Rule for rounding off of numberical values and judgement of testing values for technical standards of metallurgy*， 2013-04-25 Update

GB/T 28412-2012 history

• 2012 GB/T 28412-2012 General specification of superalloy investment cast airfoils