SAE AMS3656H-2011 PDF

Scope: This specification covers a virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded and sintered rods, tubes, and profiles. These products have been used typically for parts, such as insulators and bushings requiring chemical inertness up to 500 °F (260 °C), but usage is not limited to such applications. For such applications such as bearing, seals, and back-up rings that do not require dielectric properties and radiographic inspection it is recommended to us AMS 3678/1 Grade B.

SAE AMS3656H-2011 Referenced Document

ASTM D149-09 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies*， 2024-04-19 Update
ASTM D4894-07 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials*， 2024-04-19 Update
ASTM D638-10 Standard Test Method for Tensile Properties of Plastics*， 2024-04-19 Update
ASTM D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement*， 2024-04-19 Update
SAE AMS3678-1999 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components

2011 SAE AMS3656H-2011 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
2011 SAE AMS3656D-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
2010 SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
2008 SAE AMS3656F-2008 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
1998 SAE AMS3656E-1998 Polytetrafluoroethylene Extrusions Normal Strength, As Sintered
1993 SAE AMS3656E-1993 Polytetrafluoroethylene Extrusions, Normal Strength, As Sintered
1978 SAE AMS3656C-1978 Polytetrafluoroethylene Extrusions Normal Strength@ As Sintered@ Radiographically Inspected
1976 SAE AMS3656B-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
1966 SAE AMS3656A-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
1960 SAE AMS3656-1960 POLYTETRAFLUOROETHYLENE RODS AND TUBES, EXTRUDED TFE Fluorocarbon Resin As Sintered