SAE AMS3678-1999
Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
- Standard No.
- SAE AMS3678-1999
- Release Date
- 1999
- Published By
- Society of Automotive Engineers (SAE)
- Status
- 2006-06
- Replace By
- SAE AMS3678A-2004
- Latest
- SAE AMS3678D-2016
- Scope
- This specification covers a polytetrafluoroethylene (PTFE) resin filledwith inorganic pigment in the form of extruded or molded rods or tubes which are sintered after molding or, in the case of extrusions, sintered during the extrusion process. These products have been used typically for parts such as backup rings and seal elements in both static and dynamic applications requiring dimensional stability up to 450 degrees F (232 degrees C) with good mechanical properties, but usage is not limited to such applications. Each application should be considered individually.
SAE AMS3678-1999 history
- 2016 SAE AMS3678D-2016 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
- 2010 SAE AMS3678C-2010 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled
- 2006 SAE AMS3678B-2006 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
- 2004 SAE AMS3678A-2004 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled@ Pigmented@ and Filled Components
- 1999 SAE AMS3678-1999 Polytetrafluoroethylene (PTFE) Moldings and Extrusions Unfilled, Pigmented, and Filled Components
