SAE AMS3656F-2008
Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered

Standard No.

SAE AMS3656F-2008

Release Date

2008

Published By

Society of Automotive Engineers (SAE)

Status

Withdraw

Replace By

SAE AMS3656G-2010

Latest

SAE AMS3656H-2011

Scope

This specification covers a virgin, unfilled polytetrafluoroethylene (PTFE) in the form of extruded and sintered rods, tubes, and shapes. These products have been used typically for parts, such as insulators, bearings, seals, and back-up rings, requiring chemical inertness up to 500 ?F (260 ?C), but usage is not limited to such applications.

SAE AMS3656F-2008 history

• 2011 SAE AMS3656H-2011 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
• 2011 SAE AMS3656D-2011 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
• 2010 SAE AMS3656G-2010 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
• 2008 SAE AMS3656F-2008 Polytetrafluoroethylene (PTFE) Extrusions, Normal Strength, As Sintered
• 1998 SAE AMS3656E-1998 Polytetrafluoroethylene Extrusions Normal Strength, As Sintered
• 1993 SAE AMS3656E-1993 Polytetrafluoroethylene Extrusions, Normal Strength, As Sintered
• 1978 SAE AMS3656C-1978 Polytetrafluoroethylene Extrusions Normal Strength@ As Sintered@ Radiographically Inspected
• 1976 SAE AMS3656B-1976 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
• 1966 SAE AMS3656A-1966 POLYTETRAFLUOROETHYLENE EXTRUSIONS Normal Strength, As Sintered, Radiographically Inspected
• 1960 SAE AMS3656-1960 POLYTETRAFLUOROETHYLENE RODS AND TUBES, EXTRUDED TFE Fluorocarbon Resin As Sintered