GB/T 15597.2-2010 Plastics.Poly(methyl methacrylate)(PMMA)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties (English Version)
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 15597.2-2010
Scope
This part of GB/T 15597 specifies the molded sample method and test performance method of PMMA materials under specified conditions. All properties listed in this section and involved in GB/T 15597.1-2009 should be determined by the methods in this section. No specific performance values are listed here. Those properties required for the nomenclature of PMMA molding and extrusion materials are given in GB/T 15597.1-2009. Other performances are measured with reference to the relevant methods in this section. The values determined by the methods listed in this section are not necessarily the same as the performance values of samples obtained with different dimensions and/or sample preparation techniques. Because they are also affected by pigments and other additives. The property values for plastic parts depend on the molding compound, shape, test method and anisotropy of the substance. The latter also depends on the gate and molding conditions, such as temperature, pressure or injection rate. Any subsequent processing, such as conditioning or annealing, should also be considered. The thermal history and internal stress of the specimen strongly affect the thermomechanical properties and resistance to environmental stress cracking. However, the influence on the electrical properties is minimal; the electrical properties mainly depend on the chemical composition of the molding compound.
GB/T 15597.2-2010 Referenced Document
GB/T 1033.1-2008 Plastics.Methods for determining density of non-celluar plastics.Part1:Immersion method,liquid pyknometer method and titration method
GB/T 1034-2008 Plastics.Determination of water absorption
GB/T 1040.2-2006 Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics
GB/T 1041-2008 Plastics.Determination of compressive properties
GB/T 1043.1-2008 Plastics.Determination of charpy impact properties.Part 1:Non-instrumented impact test
GB/T 11547-2008 Plastic.Methods of test for the determination of the effects of immersion in liquid chemicals
GB/T 15597.1-2009 Plastics.Poly(methyl metharylate)(PMMA) moulding and extrusion materials.Part 1:Designation system and basis for specifications
GB/T 1633-2000 Plastics--Thermoplastic materials--Determination of vicat softening temperature(VST)
GB/T 1634.2-2004 Plastics-Determination of temperature of deflection under load-Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 17037.1 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles,and moulding of multipurpose and bar test specimens*, 2019-05-10 Update
GB/T 1843-2008 Determination of Izod Impact Strength of Plastics
GB/T 3398.1-2008 Plastics.Determination of hardness.Part 1:Ball indentation method
GB/T 3398.2-2008 Plastics.Determination of hardness.Part 2:Rockwell hardness
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 9341-2008 Plastic.Determination of flexural properties
GB/T 15597.2-2010 history
2010GB/T 15597.2-2010 Plastics.Poly(methyl methacrylate)(PMMA)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties