GB/T 11618.2-2008
Pipe fittings of copper and copper alloys.Part 2:Fittings of press type (English Version)
- Standard No.
- GB/T 11618.2-2008
- Language
- Chinese, Available in English version
- Release Date
- 2008
- Published By
- General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
- Latest
- GB/T 11618.2-2008
- Scope
- This part specifies the classification, requirements, test methods, inspection rules and signs, packaging, transportation and storage of compression-type copper pipe fittings (hereinafter referred to as compression fittings) whose steel pipe dimensions are connected according to GB/T 18033. This standard is applicable to compression pipe fittings for copper pipelines with nominal pressure not greater than PN1.6MPa and nominal diameter not greater than DN 100mm used to transport domestic water (cold water, hot water), drinking water, gas, medical gas, seawater, etc Design, manufacture and acceptance.
GB/T 11618.2-2008 Referenced Document
- GB/T 1176-1987 Specification for cast copper alloys
- GB/T 1685 Rubber,vulcanized or thermoplastic.Determination of stress relaxation in compression at ambient and at elevated temperatures
- GB/T 1690 Rubber,vulcanized or thermoplastic.Determination of the effect of liquids*， 2011-01-14 Update
- GB/T 1804-2000 General tolerances Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 191 Packaging.Pictorial marking for handling of goods
- GB/T 2040-2008 Sheet of copper and copper alloy
- GB/T 2059-2008 Strip of copper and copper alloy
- GB/T 3512 Rubber, vulcanized or thermoplastic.Accelerated ageing and heat resistance tests.Air-oven method*， 2014-12-22 Update
- GB/T 5231-2001 Wrought copper and copper alloys chemical composition limits and forms of wrought products
- GB/T 528 Rubber,vulcanized or thermoplastic.Determination of tensile stress-strain properties*， 2009-04-24 Update
- GB/T 531 Rubber--Determination of indentation hardness by means of pocket hardness meters
- GB/T 5720 Test methods for rubber O-rings
- GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads Part 1:Parallel internal and taper external threads
- GB/T 7759 Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
- GB/T 7762 Rubber, vulcanized or thermoplastic.Resistance to ozone cracking.Static strain testing*， 2014-12-22 Update
GB/T 11618.2-2008 history
- 2008 GB/T 11618.2-2008 Pipe fittings of copper and copper alloys.Part 2:Fittings of press type
