GB/T 532-2008 (English Version) PDF

Standard No.: GB/T 532-2008
Language: Chinese, Available in English version
Release Date: 2008
Published By: General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest: GB/T 532-2008
Replace: GB/T 532-1997

Scope: WARNING—Personnel using this section should have practical experience in formal laboratory work. This section does not address all possible security issues. It is the user's responsibility to take appropriate safety and health measures and ensure compliance with the conditions stipulated in the relevant national laws and regulations. This standard specifies the method for determining the force required to separate the bonded interface between rubber or thermoplastic rubber and fabric layers or between fabric and fabric layers by the peel method. This standard applies to samples with an adhesive layer that is approximately flat or cylindrical samples with an inner diameter of 50 mm or more. This standard does not apply to patterns where the interlaminar surfaces contain sharp bend angles or other serious irregularities in the cutting of the specimen. This standard is not applicable to coated fabrics, which can be tested according to the provisions of HG/T 3052; nor is it applicable to fabric conveyor belts, which can be tested according to the provisions of GB/T 6759.

GB/T 532-2008 Referenced Document

GB/T 12833 Rubber and plastics. Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength
GB/T 2941 Rubber. General procedures for preparing and conditioning test pieces for physical test methods
ISO 5893:2002 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification

2008 GB/T 532-2008 Rubber,vulcanized or thermoplastic.Determination of adhesion to textile fabric
1997 GB/T 532-1997 Rubber,vulcanized or thermoplastic--Determination of adhesion to textile fabric