JT/T 224-2008 (English Version) PDF

Scope: This standard specifies the technical requirements, test methods, inspection rules and marking, packaging, transportation and storage requirements for medium-load vehicle gear oil. This standard is applicable to the lubrication of manual transmission cases, spiral bevel gears, especially various automotive hypoid gears operating at low speeds and high torques, high speeds and low torques, as well as stipulated use (GL-4) quality level Gear oil used in the rear axle main reducer.

JT/T 224-2008 Referenced Document

GB/T 11143 Standard test method for rust-preventing characteristics of inhibited mineral oil in the presence of water
GB/T 11145 Standard test method for measurement of low-temperature viscosity of lubricants.Brookfield viscometer method*， 2014-02-19 Update
GB/T 12579 Determination of foaming characteristics of lubricating oils
GB/T 2541 Petroleum products--Computation table for viscosity indices
GB/T 260 Test method for water in petroleum products.Distillation method*， 2016-12-13 Update
GB/T 265 Petroleum products--Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 267 Petroleum products--Determination of flash and fire points--Open cup
GB/T 3535 Petroleum products.Determination of pour point
GB/T 387 Dark petroleum products--Determination of sulphur content--Tubular oven method
GB/T 4756 Method for manual sampling of petroleum liquids*， 2015-12-31 Update
GB/T 5096 Test method for corrosiveness to copper from petroleum products by copper strip test*， 2017-07-31 Update
GB/T 511 Petroleum,petroleum products and additives.Method for determination of machanical admixtures*， 2010-09-02 Update
SH 0164 Rules for Packaging, Storage, Transportation and Delivery of Petroleum Products
SH/T 0296 Determination of phosphorus content of additives and lubricating oils containing additives (colorimetric method)