General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China
Latest
GB/T 35205.1-2017
Scope
This part of GB/T 35205 specifies the general safety requirements for non-rotating off-road forklifts with telescopic booms (hereinafter referred to as "forklifts"). This type of forklift has an articulated or integral frame and is equipped with a telescopic arm lifting device (articulated arm), which is usually equipped with a retrieval device fork and a fork frame. Forks and other integral attachments are considered part of the forklift. In addition to the relevant provisions of this standard, other parts of this standard also apply to these attachments. This standard does not apply to the following: a) industrial telehandlers covered by ISO 3691-2; b) machinery (such as loaders) designed primarily for earthmoving operations, even if their buckets are replaced by forks (see ISO 20474); c) vehicles (mobile cranes) designed to be mainly carried by variable-length lifting suspension members (such as wire ropes, chains), and the load can swing freely in all directions; d) equipped with personnel/working platforms Vehicles, designed to lift personnel to corresponding working positions; e) Vehicles designed mainly for handling containers. The major hazards covered in this section are listed in Appendix A. This standard does not deal with the dangers that may occur in the following situations: - during the manufacturing process; - when handling suspended loads that can swing freely; - when using on roads; - when using in potentially explosive atmospheres; Batteries, liquefied petroleum gas (LPG) or hybrid power are used as the main power source.
GB/T 22417-2008 Fork-lift trucks.Fork-arm extensions and telescopic fork arms.Technical characteristics and strength requirements
GB/T 25607-2010 Earth-moving machinery.Guards.Definitions and requirements
GB/T 25608-2010 Earth-moving machinery.Performance requirements for non-metallic fuel tanks
GB/T 25624-2010 Earth-moving machinery.Operator's seat.Dimensions and requirements
GB/T 25686-2010 Earth-moving machinery.Safety requirements for remote operator control
GB/T 26949.1 Industrial trucks —Verification of stability—Part 1:General*, 2020-11-19 Update
GB/T 26949.10 Industrial trucks.Verification of stability.Part 10: Additional stability tests for trucks operating in the special conditions of stacking with load laterally displaced by powered devices
GB/T 26949.11 Industrial trucks—Verification of stability—Part 11: Industrial variable-reach trucks
GB/T 26949.12 Industrial trucks—Verification of stability—Part 12:Industrial variable-reach trucks handling freight containers of 6 m length and longer*, 2021-12-31 Update
GB/T 26949.13 Industrial trucks—Verification of stability—Part 13: Rough-terrain trucks with mast
GB/T 26949.14 Industrial trucks—Verification of stability—Part 14: Rough-terrain variable-reach trucks
GB/T 26949.15 Industrial trucks—Verification of stability—Part 15: Counterbalanced trucks with articulated steering
GB/T 26949.16 Industrial trucks.Verification of stability.Part 16:Pedestrian-propelled trucks*, 2018-07-13 Update
GB/T 26949.2 Industrial trucks—Verification of stability—Part 2:Counterbalanced trucks with mast*, 2022-12-30 Update
GB/T 26949.20 Industrial trucks—Verification of stability—Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
GB/T 26949.21 Industrial vehicle stability verification Part 21: Picking vehicles with operator position lifting height greater than 1 200 mm*, 2023-09-07 Update
GB/T 26949.22 Industrial trucks—Verification of stability—Part 22:Lateral- and front-stacking trucks with and without elevating operator position*, 2019-10-18 Update
GB/T 26949.3 Industrial trucks—Verification of stability—Part 3: Reach and straddle trucks*, 2018-05-14 Update
GB/T 26949.4 Industrial trucks—Verification of stability—Part 4:Pallet stackers,double stackers and order-picking trucks with operator position elevating up to and including 1 200mm lift height*, 2022-07-11 Update
GB/T 26949.5 Industrial trucks.Verification of stability.Part 5:Single-side-loading trucks*, 2018-05-14 Update
GB/T 26949.7 Industrial Vehicle Stability Verification Part 7: Bidirectional and Multidirectional Operation of Forklifts*, 2023-11-27 Update
GB/T 26949.8 Industrial trucks—Verification of stability—Part 8 : Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated*, 2022-07-11 Update
GB/T 26949.9 Industrial trucks.Verification of stability.Part 9:Counterbalanced trucks with mast handling freight containers of 6 m length and longer*, 2018-07-13 Update
GB/T 2893.1-2013 Graphical symbols Safety colors and safety signs Part 1: Design principles for safety signs and safety markings
GB/T 2893.2-2008 Graphical symbols.Safety colours and safety signs.Part 2:Design principles for product safety labels
GB/T 5182-2008 Fork-lift trucks.Fork arms.Technical characteristics and testing