GB/T 5169.16-2017 Fire hazard testing for electric and electronic products.Part 16:Test flames.50 W horizontal and vertical flame test methods (English Version)
This part of GB/T 5169 specifies a small-scale laboratory test procedure for comparing the combustion performance of different materials used in electrical and electronic products. In a small flame with a power of 50 W. This test method is used to determine the linear burning rate or self-extinguishing properties of materials. The test methods in this part are applicable to solid materials and foamed plastics with an apparent density not less than 250 kg/m3 when determined according to the method of ISO 845. This section gives two test methods. Method A is a horizontal burning test designed to measure the linear burning rate of a material under specified test conditions. Method B is a vertical burning test designed to measure the self-extinguishing ability of a material under specified test conditions. The classification methods specified in the test methods described in this standard (see 8.4 and 9.4) can be used for quality assurance, preselection of the materials of which the product is composed, or to verify the minimum fire rating required for the materials used in the finished product. This part is intended for product standards committees to prepare standards according to the principles specified in IEC Guide 104 and ISO/IEC Guide 51. One of the tasks of the Product Standards Committee is to use this series of standards wherever applicable when writing its own standards. Unless specifically mentioned or listed in the relevant standard, the requirements, test methods or test conditions of this section will not apply.
GB/T 5169.16-2017 Referenced Document
GB/T 12006.1-2009 Plastic.Polyamides.Part 1:Determination of viscosity number
GB/T 16499-2008 The preparation of safety publications and the use of basic safety publications and group safety publications
GB/T 20002.4-2015 Drafting for special aspects in standards.Part 4:Safety aspects for their inclusion in standards
GB/T 5169.1-2015 Fire hazard testing for electric and eletronic products.Part 1:Terminology concerning fire tests
GB/T 5169.22-2015 Fire Hazard Tests for Electrical and Electronic Products - Part 22: Test Flame 50W Flame Apparatus and Confirmation Test Methods
GB/T 5471-2008 Plastic.Compression moulding of test specimens of thermosetting materials
GB/T 9352-2008 Plastic.Compression moulding of test specimens of thermoplastic materials
ISO 16012 Plastics - Determination of linear dimensions of test specimens
ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing
ISO 294 Plastics - Injection moulding of test specimens of thermoplastic materials
ISO 9773 Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source AMENDMENT 1: Specimens
GB/T 5169.16-2017 history
2017GB/T 5169.16-2017 Fire hazard testing for electric and electronic products.Part 16:Test flames.50 W horizontal and vertical flame test methods
2008GB/T 5169.16-2008 Fire hazard testing for electric and electronic products.Part 16:Test flames.50W horizontal and vertical flame test methods
2002GB/T 5169.16-2002 Fire hazard testing for electric and electronic products--Part 16: 50W horizontal and vertical flame test methods